A87L-0001-0213#008G - 8GB Half Slim SATA SSD MO-297 Panel i Storage Module

A87L-0001-0213#008G - 8GB Half Slim SATA SSD MO-297 Panel i Storage Module

Description

The A87L-0001-0213#008G is an 8GB half-slim SATA solid state drive module used as the main storage device in CNC operator panels. It provides solid-state storage for the control’s operating system, ladder, parameters, and part programs in a compact MO-297 card-style form factor.

This module is intended as a direct hardware replacement or spare for systems that were originally supplied with an A87L-0001-0213#008G halfslim SSD in a PANEL i or similar embedded operator unit, or where 8GB capacity is approved within this SSD family.

Technical Specifications

• Part number: A87L-0001-0213#008G
• Description: Halfslim SSD storage module
• Capacity: 8GB
• Form factor: Half Slim SSD, MO-297 card type
• Interface: SATA
• Supply voltage: DC 5V
• Typical use: Embedded storage in CNC operator panels and compact control units
• Media type: Solid state (no moving parts)

Interchangeable / Replacement Part Numbers

(Use these only where the machine builder or documentation confirms compatibility.)

• A87L-0001-0213#004G - Halfslim SSD 4GB
• A87L-0001-0213#016G - Halfslim SSD 16GB
• A87L-0001-0209#032G - Halfslim SSD 32GB
• A87L-0001-0209#064G - Halfslim SSD 64GB

✅ Confirmed Compatibility

Please note that the following list is not exhaustive. Compatibility depends on your system's specific configuration. It's essential to verify compatibility with your system or enclosure manufacturer prior to installation.

✔️ CNC operator panels and PANEL i units originally supplied with A87L-0001-0213#008G halfslim SSD
✔️ Control systems and embedded drive units that specify the A87L-0001-0213 series halfslim SSD as the storage module
✔️ Maintenance and spare-part replacements where the existing module label matches A87L-0001-0213#008G

☑️ Key Features

☑️ 8GB half-slim MO-297 SSD optimized for embedded control applications
☑️ SATA interface for reliable, high-speed access to system and program data
☑️ Solid-state design improves resistance to shock, vibration, and temperature cycling compared to HDDs
☑️ Compact card-style form factor helps keep operator panels and control enclosures small and serviceable
☑️ Suitable as a like-for-like spare or as a modest capacity upgrade when 8GB modules are supported

⚙️ Fit Notes

• Always match the full part number printed on your existing module; A87L-0001-0213#008G is the closest one-to-one replacement for the same code.
• Other capacities from the same family (4GB, 16GB, 32GB, 64GB) may be usable only when the control software and machine builder explicitly support the change.
• Module is supplied as hardware only, without any operating system or machine data; your technician will need to clone the original image or restore from approved backup media.
• Installation, backup, and restore procedures should be performed by qualified personnel familiar with the specific CNC control and PANEL i hardware.