A90L-0001-0581 - 60x60x25mm 24V 3-Pin Cooling Fan for Fanuc CNC Robotics Automation

This 60mm x 60mm x 25mm DC cooling fan is a replacement solution for industrial equipment using part number A90L-0001-0581 and matching equivalent fan assemblies. It is designed for 24V operation and uses a 3-pin female black connector, making it suitable for Fanuc CNC, robotics, servo, drive, and automation applications that require this exact fan size and electrical format.

Technical Specifications

• Part Number: A90L-0001-0581
• Fan Type: DC brushless axial cooling fan
• Size: 60mm x 60mm x 25mm
• Voltage: 24V DC
• Rated Current:
  • 0.11A typical for 2410VL-S5W-B59 equivalent
  • 0.15A typical for 9WF0624H404 equivalent
• Connector Type: 3-pin female black connector
• Application Type: Industrial equipment cooling fan
• Common Use: CNC controls, servo amplifiers, robotics systems, automation equipment, drive assemblies, industrial electronics

Interchangeable / Replacement Part Numbers

A90L-0001-0581, 9WF0624H404, 2410VL-S5W-B59

✅ Confirmed Compatibility

Please note that the following list is not exhaustive. Compatibility depends on your system's specific configuration. It's essential to verify compatibility with your system or equipment manufacturer prior to installation.

✔️ Fanuc Industrial Applications: Equipment using A90L-0001-0581 or matching 60x60x25mm 24V 3-pin cooling fans
✔️ Fanuc CNC Systems: Compatible with select control, amplifier, and internal cooling applications requiring the same fan size, voltage, and connector style
✔️ Fanuc Robotics Systems: Suitable for select robotic controller and servo assemblies requiring this exact fan format
✔️ Automation and Industrial Equipment: Fits many industrial automation, motion-control, and power electronics applications where the original fan matches these specifications

☑️ Key Features

☑️ 60mm x 60mm x 25mm industrial cooling fan for Fanuc and similar automation equipment
☑️ 24V DC operation for CNC, robotics, servo, and industrial control applications
☑️ 3-pin female black connector for matching OEM-style installation requirements
☑️ Cross-referenced to interchangeable replacement part numbers used in compatible industrial systems
☑️ Helps restore airflow in equipment with weak, noisy, or failed original fans
☑️ Suitable for continuous-duty cooling in control cabinets, amplifiers, and motion-control assemblies

⚙️ Fit Notes

• Please match the full part number, fan dimensions, voltage, connector style, and mounting layout before ordering.
• This fan is intended for 24V DC applications and is not a replacement for 12V or AC-powered fans.
• The connector housing style and pin orientation must match your original fan for proper installation.
• Some interchangeable versions may have slightly different current ratings, but they must still match your system’s required fit and electrical format.
• Always compare your original fan label, plug style, and cable layout before purchase.
• Designed for industrial Fanuc, CNC, robotics, and automation cooling applications where the original fan uses this exact size and electrical configuration.