BA44-00329A - 26W 12V 2.2A 2.5mm x 0.7mm Barrel Connector AC Adapter Charger for Samsung Chromebook 3 / 2 / XE500C13-K03US / XE501C13-K02US / XE501C13-K01US / XE500C12-K01US

BA44-00322A 26W 12V 2.2A Wall AC Adapter 2.5mm x 0.7mm Barrel Plug

Description

AC adapter power supply rated at 12V 2.2A (26W) with a 2.5mm x 0.7mm center-positive barrel connector. Commonly used with select Samsung Chromebook models that require a 12V barrel-tip charger (not USB-C).

Technical Specifications

• Output: 12V DC 2.2A (26W)
• Input: 100-240V AC 50-60Hz (worldwide voltage support)
• DC Connector: Barrel tip 2.5mm OD x 0.7mm ID (approx. 10mm tip length)
• Polarity: Center positive
• AC Plug Style: Wall adapter with built-in US 2-prong plug (no detachable inlet cable)

Interchangeable / Replacement Part Numbers

BA44-00322A, PA-1250-98, AD-2612AUS, PA-1250-96, BA44-00329A, AD-2612A, AD-2612BKR

✅ Confirmed Compatibility

Please note that the following list is not exhaustive. Compatibility depends on your system's specific configuration. It's essential to verify compatibility with your system or enclosure manufacturer prior to installation.

✔️ Samsung Chromebook 3: XE500C13, XE500C13-K01US, XE500C13-K02US, XE500C13-K03US, XE500C13-K04US, XE500C13-K05US, XE500C13-K06US, XE500C13-S01US, XE500C13-S02US, XE500C13-S03US, XE500C13-S04US
✔️ Samsung Chromebook Plus: XE501C13, XE501C13-K01US, XE501C13-K02US, XE501C13-S01US, XE501C13-S02US
✔️ Samsung Chromebook 2: XE500C12, XE500C12-K01US, XE500C12-K02US, XE503C12, XE503C12-K01US, XE503C12-K02US, XE503C32, XE503C32-K01US
✔️ Samsung Chromebook: XE303C12, XE303C12-A01US, XE303C12-H01US, XE303C12-A01UK
✔️ Samsung Notebook: 110S1J, NT110S1J, NP930X2K, NP930X2K-K01US, NP930X2K-K02US, NP930X2K-K03US, NP930X2K-K04US

☑️ Key Features

• ☑️ Correct output rating: 12V 2.2A (26W)
• ☑️ 2.5mm x 0.7mm barrel connector with center-positive polarity
• ☑️ Wide-range input (100-240V AC) for international use with plug adapters
• ☑️ Wall-plug form factor for easy travel and storage

⚙️ Fit Notes

• Verify your original charger label shows 12V output (not 19V) and center-positive polarity.
• Confirm your device uses the 2.5mm OD x 0.7mm ID barrel tip (this is smaller than common 5.5mm tips).