F8098 - Motherboard / System Board for OptiPlex GX620

This genuine OEM system board is designed for OptiPlex GX620 Mini Tower computers. It features an LGA775 processor socket, Intel 945G Express chipset, four DDR2 memory slots, integrated graphics, and multiple expansion interfaces.

✔️ Genuine OEM System Board!
✔️ Grade A, Cleaned and Fully Tested!
✔️ Includes CPU Medics Limited Warranty!

What’s Included

F8098 Motherboard / System Board Only

Technical Specifications

Category: Motherboard / System Board
Primary Part Number: F8098
Board References: 0F8098, CN-0F8098
System Platform: OptiPlex GX620
Compatible Chassis: Mini Tower (MT)
Board Design: Proprietary BTX-Style System Board
CPU Socket: LGA775 / Socket T
Chipset: Intel 945G Express
Front-Side Bus: 533MHz / 800MHz
Integrated Graphics: Intel GMA 950
Integrated Network: RJ-45 Ethernet
Integrated Audio: Onboard Audio
Condition: Refurbished, Grade A

Processor Support

Supported Processor Families: Intel Pentium D, Intel Pentium 4, Intel Pentium 4 with Hyper-Threading, Intel Celeron D
Processor Socket: LGA775 / Socket T
Processor Installation: Processor Not Included
BIOS Requirement: Processor support may depend on the installed BIOS revision

Memory Specifications

Memory Type: DDR2 SDRAM
Memory Form Factor: 240-Pin DIMM
Supported Speeds: DDR2-533, DDR2-667
Memory Slots: 4
Memory Architecture: Dual Channel
Memory Requirements: Unbuffered, Non-ECC
Maximum Supported Memory: 4GB
Memory Included: No

Expansion and Storage Interfaces

PCI Express x16 Slots: 1
PCI Express x1 Slots: 1
PCI Slots: 2
Storage Interfaces: SATA and IDE/PATA
Graphics Expansion: Supports compatible PCI Express x16 graphics cards

Power Connections and Rear I/O

Main Power Connector: 24-Pin ATX
Processor Power Connector: 4-Pin ATX12V
Video Output: VGA
Network Port: RJ-45 Ethernet
USB Support: USB 2.0
Legacy Ports: Serial and Parallel
Audio Connections: Line-In, Line-Out and Microphone

Interchangeable / Replacement Part Numbers

F8098, 0F8098, CN-0F8098, HH807, 0HH807, CN-0HH807, X9682

✅ Confirmed Compatibility

Please note that compatibility depends on the computer’s chassis configuration. Verify the original motherboard part number, physical layout, rear ports and expansion-slot arrangement before ordering.

✔️ OptiPlex GX620 Mini Tower: GX620 MT systems using the full-size proprietary BTX motherboard layout

✔️ Compatible Chassis Configuration: Mini Tower only

☑️ Key Features

☑️ Direct replacement system board for the OptiPlex GX620 Mini Tower
☑️ Intel 945G Express chipset
☑️ LGA775 processor socket
☑️ Four dual-channel DDR2 memory slots
☑️ Integrated Intel GMA 950 graphics
☑️ PCI Express x16 graphics expansion slot
☑️ SATA and IDE/PATA storage support
☑️ Integrated Ethernet, audio and USB connectivity
☑️ Serial and parallel legacy-device support

⚙️ Fit Notes

• This motherboard is designed for the OptiPlex GX620 Mini Tower chassis only.
• It is not interchangeable with GX620 Desktop, Small Form Factor or Ultra Small Form Factor motherboards.
• This is a proprietary BTX-style system board and is not intended for installation in a standard retail ATX computer case.
• Verify part number F8098 or a listed replacement number before ordering.
• Compare the rear I/O ports, mounting points, power connectors and expansion-slot layout with the original motherboard.
• The processor, memory, heatsink, cooling fan, cables and other accessories must be transferred from the original system unless purchased separately.
• Apply fresh thermal compound before reinstalling the processor heatsink.
• Processor and memory support may depend on the installed BIOS revision.
• A replacement board may require the system date, boot order and Service Tag information to be configured in the BIOS.
• Disconnect AC power and follow proper electrostatic-discharge precautions during installation.