460W Power Supply for XPS 8910 with Micro SATA 6+2-Pin PCIe and 20-Inch 12V Cable

This 460W internal ATX-style desktop power supply is designed for compatible XPS 8910 tower configurations requiring a 24-pin motherboard connector, a 4-pin CPU 12V connector with approximately 20 inches of cable reach, one 6-pin and one 8-pin (6+2) PCIe graphics-power connector, four standard SATA power connectors, and a dedicated slim optical-drive power plug commonly listed as Micro SATA. The extended CPU-power lead is the key feature of this cable layout and provides the additional reach needed for proper routing in matching tower chassis.

Technical Specifications

• Product Type: 460W internal desktop power supply
• Maximum Output Power: 460W
• Form Factor: ATX-style non-modular desktop power supply
• Dimensions: 150mm wide x 140mm deep x 86mm high
• AC Input Voltage: 100-240V AC
• AC Input Current: 8A maximum
• Input Frequency: 50/60Hz
• Power Factor Correction: Active PFC
• Reference +3.3V Output: 17A
• Reference +5V Output: 25A
• Reference +12VA Output: 18A
• Reference +12VB Output: 16A
• Reference +12VC Output: 8A
• Reference +5V Auxiliary Output: 3A
• Reference +3.3V and +5V Combined Output: 142W maximum
• Reference +12V Combined Output: 385W maximum
• Electrical Revision Note: Printed rail allocations and efficiency markings vary among the listed interchangeable production revisions; the values above are the D460AM-03 / DPS-460DB-15A reference ratings
• Main Motherboard Connector: 1x 24-pin ATX connector; approximately 11.5-inch cable
• CPU Power Connector: 1x 4-pin 12V connector; extended approximately 20-inch cable
• PCIe Graphics Connectors: 1x 6-pin connector at approximately 11 inches and 1x 8-pin (6+2) connector at approximately 14 inches on the same cable harness
• Standard SATA Power Connectors: 4x 15-pin SATA power connectors with mixed spacing across shared cable runs
• Slim Optical-Drive Power Connector: 1x 6-pin slimline SATA power connector commonly described as Micro SATA; P14 reference; approximately 18-inch cable on a SATA power run
• Cable Design: Fixed attached non-modular harness
• Cooling: Integrated internal cooling fan
• Built-In Self-Test: Rear test button with green status indicator
• Installation Type: Internal screw-mounted tower power supply
• Included: One 460W power supply with attached cable harness; AC power cord is included only when shown or specifically stated

Interchangeable / Replacement Part Numbers

PK61K, 0PK61K, AC460AM-01, D460EM-00, GJXN1, 0GJXN1, D460EGM-02, D460EGM-00, DM1RW-ABW00, DPS-460DB-18A, DPS-460DB-15A, J98H5, 0J98H5, WC1T4, 0WC1T4, PCF003, HU460AM-01, DM1RW, 0DM1RW, G5CXN, 0G5CXN, DPS-460DB-16A, 0FFD6, 00FFD6, D460AM-03

The leading-zero forms are service-label versions of the same five-character part numbers. Reference numbers may also be printed with a space before the final letter, including DPS-460DB-16 A and DPS-460DB-18 A. These spacing differences do not indicate a different wattage or connector family.

⭐ Recommended AC Power Cord - Sold Separately

This power supply uses a standard IEC C14 AC inlet. Need a replacement wall cord? Add the M2PNC - 3 FT NEMA 5-15P to IEC C13 AC Power Cable to your order.

• Cord Item Number: M2PNC
• Cord Length: Approximately 3 feet
• Wall Connector: NEMA 5-15P three-prong plug for compatible North American outlets
• Power-Supply Connector: IEC C13 connector for the PSU's IEC C14 inlet
• Important: The power cable is sold separately. Verify the required wall-plug style, cable length, and electrical rating before ordering.

✅ Confirmed Compatibility

Please note that compatibility depends on the system's original power configuration. Confirm the original power-supply part number, 460W rating, 150mm x 140mm x 86mm chassis size, screw pattern, rear-panel orientation, 24-pin motherboard plug, 4-pin CPU plug, PCIe graphics leads, SATA connector count, slim optical-drive connector, and required cable lengths before ordering. A shared wattage or similar housing alone does not confirm compatibility.

✔️ XPS Tower Models: XPS 8910, XPS 8920, and XPS 8930 configurations originally equipped with a matching 460W ATX power supply and the same attached-cable layout
✔️ Aurora Desktop Models: Aurora R5, Aurora R6, Aurora R7, and Aurora R8 configurations originally equipped with the matching 460W non-modular power-supply family
✔️ Inspiron Gaming Desktop Model: Inspiron 5680 configurations equipped with the matching 460W power supply and complete connector layout
✔️ Precision Tower Model: Precision 3630 Tower configurations using the matching 460W D460EGM / 0FFD6 / G5CXN connector family

☑️ Key Features

☑️ 460W replacement power supply for compatible desktop tower configurations
☑️ Extended approximately 20-inch 4-pin CPU 12V cable for proper chassis routing
☑️ Standard 24-pin ATX motherboard power connector
☑️ Includes one 6-pin and one 8-pin (6+2) PCIe graphics-power connector on a shared harness
☑️ Includes four standard SATA power connectors for compatible hard drives, solid-state drives, and other SATA-powered devices
☑️ Dedicated 6-pin slimline optical-drive power connector commonly listed as Micro SATA
☑️ Active PFC design with universal 100-240V AC input support
☑️ Standard 150mm x 140mm x 86mm ATX-style housing for matching tower chassis
☑️ Rear built-in self-test button and green status indicator for basic power-supply checking
☑️ Direct replacement option for the listed service and production reference numbers when the complete connector layout matches

⚙️ Fit Notes

• Match the original power-supply part number to one of the listed interchangeable numbers whenever possible.
• Confirm the system was configured for a 460W power supply and does not require an 850W or other higher-output unit.
• Verify the original unit uses a 24-pin ATX motherboard connector and a 4-pin CPU 12V connector.
• This is the extended-cable layout with an approximately 20-inch CPU 12V lead. Do not substitute a shorter-cable 460W unit if the cable cannot reach the motherboard connector through the intended chassis-routing path.
• The 8-pin (6+2) connector is for PCIe graphics power. It is not an 8-pin CPU or EPS motherboard connector.
• The PCIe cable provides one 6-pin plug and one 6+2-pin plug on the same harness. Confirm the graphics card's connector count and recommended power-supply capacity before installation.
• Do not use this unit for a graphics card that requires greater total power, two independent 8-pin power cables, or a power-supply capacity above 460W.
• The small optical-drive plug is a 6-pin slimline SATA power connector commonly described in parts listings as Micro SATA. Compare its shape and keying with the original connector because Micro SATA and slimline SATA terminology is often used inconsistently.
• Confirm that four standard SATA power connectors are sufficient and that their spacing reaches every installed storage device.
• Cable lengths are approximate and may vary slightly by production revision; verify routing clearance without stretching, pinching, or sharply bending any cable.
• Some listed interchangeable revisions have different printed +12V and auxiliary rail allocations or efficiency markings. Use the total 460W rating, exact part-number family, complete connector set, and physical fit as the replacement criteria.
• Compare the 150mm x 140mm x 86mm housing, mounting holes, rear AC inlet, ventilation pattern, fan orientation, and cable-exit location with the original unit.