EV-108U EV108U - M8 Unshielded Inductive Proximity Sensor 12-24VDC 2-Wire NO 4mm Range
Compact DC 2-wire inductive proximity sensor with built-in amplifier. Unshielded M8 body for non-flush mounting and a stable 4 mm sensing range for reliable metal detection in tight spaces.
Description
End-sensing, unshielded M8 proximity switch designed for short-range metal detection on machinery, fixtures, and automation tooling. The 2-wire Normally Open output simplifies wiring in DC control circuits while maintaining fast response for high-speed parts.
Technical Specifications
- Model: EV-108U
- Alternate marking: EV108U
- Sensing type: Inductive, end-sensing
- Mounting: M8 x 1 cylindrical, unshielded (non-flush)
- Sensing distance: 4 mm ±10% (standard Fe 20×20×1 mm target)
- Operation mode: NO (Normally Open)
- Output style: DC 2-wire, switching current 5–80 mA
- Supply voltage: 12–24 VDC (ripple ≤20% p-p)
- Leakage current: ≤1.0 mA
- Residual voltage: ≤3.6 V (with 2 m cable)
- Response frequency: 800 Hz
- Housing: Metal barrel with plastic sensing face
- Environmental: IP67, operating temp −25 °C to +80 °C
- Connection: 2 m pre-wired cable, includes lock nuts
Interchangeable / Replacement Part Numbers
✅ Confirmed Compatibility
Please note that the following list is not exhaustive. Compatibility depends on your system’s specific configuration. It’s essential to verify compatibility with your system or enclosure manufacturer prior to installation.
✔ Control circuits: DC proximity input circuits 12–24 VDC supporting 2-wire NO sensors
✔ Mounting: M8 non-flush locations with adequate side clearance
✔ Targets: Ferrous metals at full range; non-ferrous detect at reduced distances
☑️ Key Features
- ☑️ M8 unshielded body for longer reach in non-flush installs
- ☑️ 4 mm stable detection with fast 800 Hz response
- ☑️ Simple 2-wire NO wiring for DC loads and PLC inputs
- ☑️ Robust IP67 build for industrial environments
- ☑️ Low leakage and residual voltage for clean switching
