A90L-0001-0583 - 92x92x25mm DC24V 0.13A 3-Pin Cooling Fan for Fanuc CNC Robotics Automation

This 92mm x 92mm x 25mm DC cooling fan is a replacement solution for industrial equipment using part number A90L-0001-0583 and matching equivalent fan assemblies. It is designed for 24V operation and uses a 3-pin male plug style connector, making it suitable for Fanuc CNC, robotics, servo, drive, and automation applications that require this exact fan size and electrical format.

Technical Specifications

• Part Number: A90L-0001-0583
• Fan Type: DC brushless axial cooling fan
• Size: 92mm x 92mm x 25mm
• Nominal Fan Class: Commonly referenced as 90mm class
• Voltage: 24V DC
• Rated Current: 0.13A
• Equivalent Current Range: Some compatible equivalents may be rated up to 0.19A
• Connector Type: 3-Pin male plug
• Connector Housing: 4-port style housing with 3 active pins
• Cable Length: Approx. 60mm
• Application Type: Industrial equipment cooling fan

Interchangeable / Replacement Part Numbers

A90L-0001-0583, 9WF0924H4031, 3610VL-05W-B39

✅ Confirmed Compatibility

Please note that the following list is not exhaustive. Compatibility depends on your system's specific configuration. It's essential to verify compatibility with your system or equipment manufacturer prior to installation.

✔️ Fanuc CNC Systems: Compatible with select Fanuc CNC control, drive, and internal cooling applications using A90L-0001-0583 or the same 92x92x25mm 24V 3-pin fan format
✔️ Fanuc Robotics Systems: Suitable for select Fanuc robotic controller and servo assemblies requiring this fan size, voltage, and connector style
✔️ Industrial Automation Equipment: Compatible with many automation, motion-control, inverter, and industrial electronics applications using the same 24V 90mm-class cooling fan configuration
✔️ Servo and Amplifier Cooling Applications: Fits supported amplifier, power, and control modules where the original fan matches the dimensions, connector style, and electrical requirements listed above

☑️ Key Features

☑️ 92mm x 92mm x 25mm industrial cooling fan for Fanuc and similar automation equipment
☑️ 24V DC operation for CNC, robotics, servo, and industrial control applications
☑️ 3-pin male plug connector for matching OEM-style installation requirements
☑️ Cross-referenced to interchangeable replacement part numbers used in compatible industrial systems
☑️ Helps restore airflow in equipment with weak, noisy, or failed original fans
☑️ Suitable for continuous-duty cooling in control cabinets, amplifiers, and motion-control assemblies

⚙️ Fit Notes

• Please match the full part number, fan dimensions, voltage, connector style, and mounting layout before ordering.
• This fan is commonly described as a 90mm class fan, but the frame size is approximately 92mm x 92mm x 25mm.
• The connector housing style and pin orientation must match your original fan for proper installation.
• Some interchangeable versions may have slightly different current ratings, but they must still match your system’s required fit and connector format.