128MB NVIDIA Quadro4 980 XGL Dual DVI AGP 8x Video Card

This 128MB NVIDIA Quadro4 980 XGL graphics card is a legacy professional workstation video card designed for compatible AGP-based workstation systems. It features the NVIDIA NV28GL Quadro4 architecture, 128MB DDR SDRAM memory, AGP 8x interface support, and dual DVI-I outputs for multi-display workstation configurations.

This card is commonly used in select HP, Compaq, Dell Precision, IBM IntelliStation, and other professional workstation platforms that support full-height AGP 4x / 8x graphics cards.

Technical Specifications

• Primary Part Number: 313285-001
• Product Type: Workstation Video Card / Graphics Card
• GPU Model: NVIDIA Quadro4 980 XGL
• GPU Chip: NVIDIA NV28GL
• Process Technology: 150nm CMOS
• Transistors: 63.0 million
• Core Clock: 300MHz
• Pixel Fillrate: 1200 MPixels/s
• Texture Fillrate: 2400 MTexels/s
• Shader Architecture: Quadro4 architecture
• Pixel Configuration: 4 x 2
• Vertex Configuration: 2 x 3
• Video Memory: 128MB DDR SDRAM
• Memory Type: DDR SDRAM
• Memory Speed: DDR-650
• Memory Bus Width: 128-bit
• Memory Bandwidth: 10.4GB/s
• RAMDAC: 400MHz per DVI output
• Bus Interface: AGP 8x
• AGP Bandwidth: Up to 2.1GB/s peak bandwidth
• Backward Interface Support: AGP 4x / 8x, with platform-dependent AGP compatibility
• Display Outputs: 2 x DVI-I
• Display Support: Dual display output
• Maximum Resolution: Up to 2048 x 1536 at 85Hz per monitor, depending on display, adapter, driver, and system support
• Estimated Power Draw: Approximately 45W
• Auxiliary Power Connector: Not typically required
• Form Factor: Full-height workstation AGP add-in card
• Approximate Dimensions: 2.86" H x ~5.5" L
• BIOS / Firmware: OEM NVIDIA VBIOS ROM
• Driver Support: Legacy NVIDIA Quadro drivers for supported operating systems
• Common Supported Operating Systems: Windows 2000, Windows XP, legacy workstation Linux distributions, and other OS versions with compatible legacy Quadro driver support
• Original Release Era: 2002
• Current Status: Legacy / discontinued workstation graphics card

Interchangeable / Replacement Part Numbers

308961-001, 308961-002, 308961-003, 308961-004, 313285-001, 342497-001, AA623A, A9655A, DE848AV, 312518-B21, 312522-B21, 690-50152-0003-000, 900-50152-1700-000, QUADRO4-980XGL, R0988, 0R0988, 59P4990, 59P4991, 25P6687-211, 600-50152-0021-004, VCQ4980XGL-10-BLK

✅ Confirmed Compatibility

Please note that the following list is not exhaustive. Compatibility depends on your system's specific configuration. It's essential to verify compatibility with your system or enclosure manufacturer prior to installation.

✔️ HP / Compaq Workstations: xw5000, xw6000, xw8000, zx6000
✔️ HP / Compaq Professional Workstation Platforms: Compatible HP / Compaq workstation systems that support full-height AGP 4x / 8x professional graphics cards and Quadro4 980 XGL option cards
✔️ Dell Precision Workstations: Precision 340, Precision 350, Precision 360, Precision 370
✔️ Dell Systems Using DPN R0988 / 0R0988: Compatible Dell Precision workstation configurations that support AGP 4x / 8x graphics cards and the R0988 / 0R0988 Quadro4 980 XGL graphics card
✔️ IBM IntelliStation / Lenovo Workstation Platforms: Compatible IBM IntelliStation and early Lenovo workstation systems that support AGP 4x / 8x graphics cards and IBM / Lenovo FRU 59P4990 or 59P4991
✔️ IBM / Lenovo Systems Using FRU References: Compatible workstation configurations using 59P4990, 59P4991, 25P6687-211, or 600-50152-0021-004 Quadro4 980 XGL graphics card references
✔️ AGP Workstation Platforms: Compatible legacy workstation motherboards with a full-height AGP 4x / 8x slot, appropriate BIOS support, and adequate AGP slot power
✔️ Professional CAD / Engineering Workstations: Compatible legacy CAD, 3D modeling, visualization, and engineering workstation systems originally configured for NVIDIA Quadro4 AGP graphics cards

☑️ Key Features

☑️ 128MB NVIDIA Quadro4 980 XGL professional workstation graphics card
☑️ AGP 8x interface for compatible legacy workstation platforms
☑️ Dual DVI-I outputs for multi-monitor workstation setups
☑️ NVIDIA NV28GL Quadro4 architecture designed for professional graphics workloads
☑️ 128-bit DDR memory interface with 10.4GB/s memory bandwidth
☑️ 400MHz RAMDAC support for high-resolution display output
☑️ Supports up to 2048 x 1536 resolution depending on monitor, adapter, system, and driver support
☑️ Suitable for legacy CAD, workstation, industrial, engineering, and visualization systems that require AGP Quadro graphics
☑️ Compatible replacement for multiple HP, Dell, IBM / Lenovo, NVIDIA, and PNY part numbers
☑️ Useful for restoring older AGP workstation systems where PCI Express graphics cards are not supported

⚙️ Fit Notes

• Please verify that your system has a compatible AGP graphics slot before ordering.
• This is an AGP video card and will not fit PCI, PCI-X, or PCI Express slots.
• This card is intended for full-height workstation chassis and may not fit low-profile or small-form-factor systems.
• Please confirm that your workstation BIOS supports NVIDIA Quadro4 AGP graphics cards.
• Driver support is legacy and depends on the operating system being used.
• This card is best suited for older workstation operating systems such as Windows 2000, Windows XP, and legacy Linux environments with compatible NVIDIA Quadro driver support.
• Modern operating systems may not provide full driver support for this legacy graphics card.
• DVI-I ports can support digital DVI displays and may support analog VGA through compatible DVI-I to VGA adapters.
• Display resolution and dual-monitor support may vary depending on monitor type, adapter, cable, driver version, and workstation configuration.
• This card does not typically require a separate auxiliary power connector, but the host workstation must provide proper AGP slot power.
• Please compare your original part number, connector layout, bracket type, and system compatibility before ordering.