HP AB527-69002 - Dual core CPU assembly - 1.0GHz PA8900 CPU with 64MB L2 cache - Requires PDC greater than 44.21 Retail
HP AB527-69001 - Dual core CPU assembly - 1.0GHz PA8900 CPU with 64MB L2 cache - Requires PDC greater than 44.21 Retail
HP D6021-69001 - Mid-plane PC board - Board that connects the I/O board, memory boards, and the processor baseboard - Mid-Plane PC Board - Board That Connects the I/O Board, Memory Boards, and the Processor Baseboard - Mounts Vertically in the Center Retail
HP D6021-63039 - Peripheral bay interconnect board - Peripheral Bay Interconnect Board - Mounts Behind the Peripheral Bay on the Bottom Left Side of the Chassis Retail
HP D6021-60002 - Front panel control board (PCA) with LCD display assembly - Front Panel Control Board with LCD Display Assembly Retail
HP 5183-6881 - SCSI ribbon cable kit (C15) - Includes a 68-pin (F) to 50-pin (F) adapter and a terminated cable marked `PCI board to MS Cage C15-90 ohm` - 68-pin (M) connector to 68-pin (M) connector - 21.3cm (8.4in) long - For SCSI DDS (DAT) tape dr Retail
HP 5183-6873 - Ultra2 LVD SCSI ribbon cable - 68-pin (M) connector marked `P2` to very high density 68-pin (F) connector marked `P1` with thumbscrews for connecting to external storage systems - 25.7cm (10.1in) long Retail
HP A6961-67206 - Printed Circuit Assembly (PCA) - Small Computer Systems Interface (SCSI) duplex board Retail
HP D7131A - SCSI interface cable - Highly flexible 68 pin high density (M) to 68 pin ultra high density (M) with offset connector - 1.0m (3.3ft) long Retail
HP A6961-69207 - Processor extender board - Has two processor sockets on one side and two on the other side Retail
HP A6961-69511 - I/O baseboard - Has eight 64-bit PCI slots - Includes Voltage Regulator Modules (VRM) Retail
HP A6961-67213 - DVD-ROM drive I/O board - Has slimline DVD-ROM drive connector and cable connector for DVD I/O board to midplane board cable Retail
HP 5064-6140 - Rack mount kit for LXr8000 NetServer - Includes rack mount rails - Rails mount on side of chassis Retail
HP D6021-63044 - Processor ejector handles - To remove processor from processor baseboard - Mounts on processor Retail
HP D6021-63043 - Front bezel kit - Comes with the LXr 8000 front bezel, hinge, latch, and hardware Retail
HP D4898-63004 - Power interconnect board - Power Interconnect Board - Mounts Behind the Power Supplies Retail
HP D4311-69008 - Processor board - Can hold up to two Pentium Pro 200MHz processors with 1MB cache - Processor Board - Can Hold up to Two Pentium Pro 200MHz Processors with 1MB Cache - Mounts on the System Processor Board - up to Two Processor Boards Retail
HP D4311-69007 - System processor board - Supports up to four processors on two processor boards - With integrated Super VGA video controller Retail
HP D4311-69002 - Processor board - Can hold up to two Pentium pro 166MHz or 200MHz processors with 512KB cache - Processor Board - Can Hold up to Two Pentium Pro 166MHz or 200MHz Processors with 512KB Cache - Mounts on the System Processor Board - up Retail
