HP 8120-1625M - Daisy chain` power cord (Black) - 18 AWG, 2.5m (8.2ft) long - Has (M) C14 plug for power input and (F) C13 plug for power output - (E7742A) Retail
HP D7112A - LH3 to LH4 system upgrade - Includes two 500 MHz Pentium III Xeon processors with 1MB L2 cache, 256MB (4x64mb) DRAM, two processor terminator boards, and four voltage regulator modules Retail
HP D7102A - LH3 to LH4 system upgrade - Includes two 400 MHz Pentium II Xeon processors with 1MB L2 cache, 256MB (4x64mb) DRAM, two processor terminator boards, and four voltage regulator modules Retail
HP D6114-69001 - 256MB, 50nS EDO DIMM memory module - Part number is for one of four modules that come in the memory upgrade kit (part of D6114A) Retail
HP D6112-69001 - 64MB, 50nS EDO DIMM memory module - Part number is for one of four modules that come in the memory upgrade kit (part of D6112A) Retail
HP 5067-4214 - Front panel assembly - Includes power button, reset button, keyboard lock, LCD display, status LED`s Retail
HP D5990-69000 - Fiber channel array - Redundant module with two fiber channel ports and two very high density 68-pin SCSI connectors Retail
HP 5064-3553 - Tubeaxial fan - For the CPU board - Mounts on the rear of the chassis (Two used) Retail
HP 5064-3538 - Dual fan assembly - Includes two fans mounted on a slide-in bracket - Installed in slot near the power supply Retail
HP 5183-3449 - Mass storage power cable (P3) - 22-pin (F) connector marked `P1` to three cable assemblies with a 14-pin (F) connector marked `P2` and four unmarked 4-pin (F) connectors - The longest cable is 50.8cm (20in) long - From backplane board Retail
HP J1476A - Console switch cable - One cable used for each port - 2.4m (8ft) long - From the J1473A or J1474A Console switch to the computer Retail
HP 5064-4694 - Cover - Large cover installed on both sides of a pedestal version or top and bottom of a rack mount version Retail
HP 5042-2144 - Latch clip - Latch clip - Catches the arm from the cover locking latch - Mounts on the front of the chassis Retail
HP E7674-63001 - 16A power distribution unit (PDU) - Has one C20 (M) for power input, seven C13 (F) power outlets, and one C19 (F) power outlet - For 100-240V - (E7674A) Retail
HP A3639-69315 - Right PCI I/O backplane board - Has six PCI slots - N4000 right PCI I/O backplane board - Has six PCI slots - Mounts vertically in the right side of chassis Retail
HP A3639-69314 - Left PCI I/O backplane board - Has six PCI slots - N4000 left PCI I/O backplane board - Has six PCI slots - Mounts vertically in the left side of chassis Retail
HP A3639-69113 - Disk/media backplane - Has power and SCSI connectors for removable media mass storage devices on one side and two SCA connectors for hot-plug hard drives on the other side Retail
HP A3639-63006 - Ribbon cable kit - Includes an RFI shield, a DB-15 (M) to DB-15 (F) adapter, and a 53.3cm (21in) ribbon cable with a 16-pin (F) connector on one end and a DB-15 (F) connector on the other end - Front panel wiring harness Retail
HP A3639-63008 - Rear fan wiring harness - 12-pin (F) connector to both a 20.8cm (8.2in) cable with a 6-pin (F) connector and a 51.3cm (20.2in) cable with a 6-pin (F) connector Retail
HP A3639-63007 - Front fan wiring harness - 12-pin (F) connector to both a 22.1cm (8.7in) cable marked `Fan 0` with a 6-pin (F) connector and a 28.6cm (11.3in) cable marked `Fan 1` with a 6-pin (F) connector Retail
HP A5864-69002 - 1024MB ECC high-density SDRAM DIMM memory module - Must be installed in pairs of equal size (2048MB kit is A5864A) Retail
