HP D8520-63026 - Ultra Wide SCSI ribbon cable with twisted pair segments - One 68-pin (M) connector marked `to SYS BD to H/SWAP` and one 68-pin (M) connector marked `to HOT SWAP` - 1.1m (3.5ft) long Retail
HP D8520-63009 - Floppy drive ribbon cable marked `Floppy disk cable` - 34-pin (F) connector marked `to system board` to 34-pin (F) connector marked `to 3.5 inch flexible disk drive` - 1.0m (3.4ft) long - From 3.5-inch floppy drive to the FDD connect Retail
HP D8520-63008 - IDE CD-ROM drive ribbon cable - 40-pin (F) connector marked `to system board` to a 40-pin (F) connector marked `to IDE CD-ROM` - 33.0cm (13in) long - From IDE CD-ROM drive to the IDE connector on the system processor board Retail
HP D8520-63006 - Cable assembly - 22-pin (F) connector marked `P1` to a 14.5cm (5.7in) cable with a 14-pin (F) connector marked `P2`, 42.7cm (16.8in) cable with two 4-pin (F) connectors, and a 57.2cm (22.5in) cable with two 4-pin (F) connectors - Pow Retail
HP D8520-63005 - Cable assembly - Has an 18-pin (F) connector, a 24-pin (F) connector, and three 14-pin (F) connectors - Overall length is 13cm (5.1in) - Power supply cable Retail
HP D8520-63004 - SCSI ribbon cable - Has 68-pin (M) connectors - 8.0cm (3.1in) long - To the hot-swap cage Retail
HP D8520-63022 - PCI board hold down latch assembly - Includes plastic shell, metal container, latches, and blue tabs Retail
HP D8520-63019 - Front bezel - Mounts to the front of the chassis - Used for rack configuration - Includes right bezel spacer Retail
HP D8520-63018 - Front bezel - Mounts to the front of the chassis - Used for pedestal configuration Retail
HP 536394-001 - Backplane board - For the 8-bay hot-plug small form factor (SFF) hard drive cage - Mounts on the rear of the hard drive cage Retail
HP 536400-001 - Eight-bay small form factor (SFF) hot-plug drive cage assembly - Includes the drive cage structure, backplane board, front panel board, mini-SAS cables, sensor data cable, and front panel cables Retail
HP 390158-018 - 160GB hot-plug SATA hard disk drive - 7,200 RPM, 3Gb/sec transfer rate, 2.5-inch small form factor (SFF) Retail
HP 862135-001 - 4TB SATA hard drive - 7,200 RPM, 3.5-inch Large Form Factor (LFF), 6 Gb/s transfer rate interface, Low Profile (LP), Midline (MDL), 512e format , digitally signed firmware (DS) Retail
HP 878646-001 - 28 AWG, 3-pin, Peripheral Component Interconnect (PCI) to Controller, LG power cable Retail
HP 878645-001 - 28 AWG, 3-pin, Peripheral Component Interconnect (PCI) to Controller, standard power cable Retail
HP 5182-6749 - Fast Wide SCSI ribbon cable (C23) - Cable marked `External SCSI port cable C23-90 ohm` - 68-pin (M) connector marked `To system board` to high density 68-pin (F) connector with latch clips for the rear panel - 51.8cm (20.4in) long - Fr Retail
HP 0957-0257 - Power supply assembly (Delta SMP-260BL Rev. B) - 88-269VAC input, 47-63Hz - Three DC outputs, 260 watts - Includes fan, plug, and power control module Retail
HP J1456B - NetServer LCIIs rack mount kit - Rack mount one or two LCIIs - Contains stationary base, dual sliding shelves, blank panel, and ear panels for the column - (Quartz Gray) Retail
HP D4906-69001 - System processor board - With Super VGA video, Ultra SCSI controller, IDE controller - System (Mother) Board - with Super VGA Video, Ultra SCSI Controller, IDE Controller - Large Vertical Board in Center of Chassis Retail
HP 5183-3418 - Terminator board - Used in secondary processor socket for a system with only one processor Retail
HP 5064-1979 - Control panel - Includes indicator lights and front panel buttons - Mounts on the Black plastic PCI/ISA board guide Retail
HP D6135A - LC2 to LC3 system upgrade - Includes system processor board, one 64MB SDRAM DIMM, NetServer Navigator CD-ROM, and floppy disk - Upgrades LC2 NetServer to LC3 Retail
HP D2198A - Hard drive mounting tray kit (package of 3) - For mounting a 3.5-inch hard disk drive in a 5.25-inch drive bay - Includes tray, Dove Gray front panel, mounting screws, and status cable with LED - Hard drive mounting tray kit (Dove Gray) ( Retail
