HP 5042-2163 - Board guide for ISA and PCI boards (Large plastic piece) - Mounts near the front of the NetServer Retail
HP 5064-3501 - System board stiffener bracket - Metal bracket with board extractors that mounts to the top of the system board Retail
HP 5064-4631 - Self paced video training kit for the NetServer LH and LX - Includes NTSC format video (VHS), PAL format video (VHS), `HP NetServer Service and Support` CD-ROM, and instructions Retail
HP J1455B - Rack mount kit - Used to rack mount a NetServer LX Pro or LXe Pro - Includes base mounted on heavy duty sliding rails - Quartz Gray Retail
HP J1455A - Rack mount kit - Used to rack mount a NetServer LX Pro or LXe Pro - Includes base mounted on heavy duty sliding rails Retail
HP J1488A - 2.0m 19in bare rack cabinet - Has vented top, anti tip foot, 3in heavy duty casters, and 4 leveler screws - Quartz Gray Retail
HP J1487B - 2.0m 19in rack cabinet - Has vented top, side panels, vented rear door, anti tip foot, 3in heavy duty casters, and 4 leveler screws - Quartz Gray Retail
HP D2969-69001 - Remote assistant board - For outside Canada/USA - EISA intelligent remote management board with onboard NiCad battery, processor, & modem (Does NOT include the LAM) - Remote Assistant Board (for Outside USA and Canada) (D2969C) - EIS Retail
HP 1821-3451 - Intel Pentium Pro processor - 166MHz (P6, 512KB Level-2 cache) - Does not include heat sink Retail
HP 5064-1925 - Hot swap power supply module assembly (Rev. 3) - 90-240VAC autoranging input, 410 watts - With temperature controlled fan - Plugs into the power supply cage (Three required for redundancy) Retail
HP 8120-5400 - Power cord (Black) - 2.5m (8.2ft) long - Has a 90 degree (F) receptacle with a `U` shaped channel above the ground pin to prevent use of a lower rated power cord (For 100V in Japan) Retail
HP 8120-5398 - Power cord (Black) - 2.5m (8.2ft) long - Has a 90 degree (F) receptacle with a `U` shaped channel above the ground pin to prevent use of a lower rated power cord (For 220V in Denmark) Retail
HP 8120-5397 - Power cord (Black) - 16 AWG, 2.5m (8.2ft) long - Has 90 degree (F) receptacle with a `U` shaped channel above the ground pin to prevent use of a lower rated power cord (For 220V in Switzerland) Retail
HP 8120-5395 - Power cord (Black) - 16 AWG, 2.5m (8.2ft) long - Has a 90 degree (F) receptacle with a `U` shaped channel above the ground pin to prevent use of a lower rated power cord (For 120V in the USA and Canada) Sale $39.00 Retail $59.00
HP 8120-5394M - Power cord (Black) - 2.5m (8.2ft) long - Has 90 degree (F) receptacle with a `U` shaped channel above the ground pin to prevent use of a lower rated power cord (For 220V in Europe) Retail
HP 8120-5393 - Power cord (Black) - 2.5m (8.2ft) long - Has 90 degree (F) receptacle with a `U` shaped channel above the ground pin to prevent use of a lower rated power cord (For 240V in Australia and China) Retail
HP 8120-5392M - Power cord (Black) - 2.5m (8.2ft) long - Has 90 degree (F) receptacle with a `U` shaped channel above the ground pin to prevent use of a lower rated power cord (For 240V in the UK) Retail
HP D4262-69003 - 166MHz (512KB cache) processor board - Has 2 processor sockets and integrated voltage regulators - 166MHz (512KB Cache) Processor Board - Has 2 Processor IC Sockets & Integrated Voltage Regulators - Plugs Into System Board (2 Process Retail
HP D4262-69010 - 166/200MHz (512KB cache) processor board - Has 2 processor sockets and integrated voltage regulators - 166/200MHz (512KB Cache) Processor Board - Has 2 Processor Sockets & Integrated Voltage Regulators - Plugs Into System Board (2 Pr Retail
HP D4262-69004 - System processor board - Includes IDE hard drive and floppy controllers, Super VGA video, and two Fast Wide Ultra SCSI ports - System (Mother) Board - Large Horizontal Board in Center of NetServer - Includes IDE Hard Drive and Floppy Retail
HP D4262-63002 - Processor slot termination board - Installs in second processor board slot - Processor Slot Termination Board - Installs in Second Processor Board Slot (Required in NetServers That Have Only One Processor Board) Retail
HP 5064-0756 - Control panel PC board - Includes the display and status indicators for: the power supply, fan, and disk drive - Control Panel PC Board (Includes the Display and Status Indicators for: the Power Supply, Fan, and Disk Drive) - Mounts on Retail
HP 5182-4598 - Fan jumper (Loopback connector) - For the `Fan 4` (J2G3) connector on the system board (MUST be installed) Retail
HP 5182-6790 - Tubeaxial fan - Two mount to the chassis support bracket (In the front top of the NetServer) and the third mounts to the chassis fan cage (Processor board fan) (Three used) Retail
HP 5064-0750 - Power supply cage assembly (Rev. C) - Includes metal cage with interconnecting board - For hot swap power supply modules (Note: MUST use rev 2 power supply modules only) Retail
HP 5063-8324 - Power supply cage assembly (Rev. A) - Includes metal cage with interconnecting board - For hot swap power supply modules (Note: can use either rev 1 or rev 2 power supply modules) Retail
HP 5182-4581 - Ribbon cable marked `Control panel power cable` - 5-pin (F) connector to 5-pin (F) connector - 1.0m (3.3ft) long Retail
HP 5182-4580 - Power cable asembly - 20-pin (F) connector with two ferrites to 20-pin (F) connector - 94cm (37in) long - From system board to power supply cage (two used) Retail
HP 5182-4578 - Power cable with a ferrite - 14-pin (F) connector to 14-pin (F) connector - 97.8cm (38.5in) long - From system board to power supply cage Retail
HP D4968AR - 512MB ECC DIMM kit - Includes four 128MB ECC DIMMs - Used to add 512MB to a D4967A DIMM memory board Retail
HP D4968A - 512MB ECC DIMM kit - Includes four 128MB ECC DIMMs - Used to add 512MB to a D4967A DIMM memory board Retail
HP 5064-1913 - Locking cover (Flint Gray) - Attaches to the front of the `Hot Swap` drive trays Retail
HP 5182-6740 - SCSI ribbon cable kit (C13) - Cable clamp and 90 ohm cable with a 68-pin (M) connector marked `To system board` and a high density 68-pin (F) connector with latch clips marked `To External SCSI Port` for the rear panel - 74.9cm (29.5in Retail
HP 5182-9413 - Fast Narrow SCSI-2 90 ohm ribbon cable with termination (C21) - Has a 50-pin (F) connector marked `To array back plane` and two 50-pin (F) connector marked `To unterminated SCSI device` - 47cm (18.5in) long - From one or two Fast SCSI- Retail
HP 5182-4572 - Fast Wide SCSI ribbon cable marked `PCI board to MS cage C15-90 ohm` - Two 68-pin (M) connectors marked `To PCI board` and `To SCSI mass storage device` - 90.7cm (35.7in) long - From hot-swap backplane boards to PCI disk array controll Retail
HP 5182-4574 - Fast Wide SCSI ribbon cable (C12) - Cable is marked `Sys board to MS device C12-90 ohm` - 68-pin (M) connector marked `To system board` and a 68-pin (M) connector marked `To SCSI mass storage device` - 50.8cm (20in) long - From hot-swa Retail
HP 5182-6735 - Floppy drive ribbon cable marked `Flexible disk cable` - 34-pin (F) connector marked `to system board` to a 34-pin (F) old-style edge connector and a 34-pin (F) new-style connector marked `to 3.5 inch flexible disk drive` - 80.8cm (31. Retail
HP 5182-6730 - Ribbon cable - 3-pin (F) connector to 3-pin (F) connector - 40cm (15.8in) long - I2C bus cable assembly (B11) - From hot-swap backplane boards to system (mother) board Retail
