HP 5182-6725 - IDE hard drive ribbon cable marked `IDE hard disk cable` - 40-pin (F) connector marked `To system board` to a 40-pin (F) connector marked `To IDE drive` - 74.9cm (29.5in) long - Cable D11 Retail
HP 5182-4579 - Drive power cable (P11) - 18-pin (F) connector marked `BP1` to five cables containing 4-pin (F) connectors marked `P16`, `P17`, `P18`, `P19`, `P20`, `P21`, `P22`, `P23`, and `P24` - Longest cable is 86.9cm (34.2in) long Retail
HP 5063-8390 - `Hot swap` bezel assembly (Flint Gray) - Frame around six `hot swap` drives - Includes the lock Retail
HP 5002-3709 - Filler panel - Covers the empty power supply module slot(s) when the module is not currently installed (Ensures proper airflow in NetServer) Retail
HP 5002-3274 - Lower side panel - Thin strip below the right and left side cover panels (two used) Retail
HP 5041-5325 - Flip down door (Smoked plastic) - Covers the power switch, switch, keyboard lock, and reset buttons Retail
HP 5002-3282 - Processor cooling duct cover - Large metal cover installs over the processor board(s) and memory expansion board Retail
HP 5182-9344 - Heat sink retainer clip - Retainer clip - Holds the heat sink on the Processor IC Retail
HP 5182-9416 - Fixed caster (with locking lever) - Mounts on the bottom of the NetServer (two used) Retail
HP 5063-8329 - Lower bezel assembly - Includes right and left access doors - Covers both of the `Hot Swap` drive bays (Note: Doors are no longer separately available) Retail
HP D3330-60003 - Self paced training kit for NetServer family - Includes service manual, NTSC format video (VHS), and one test Retail
HP D2971-63006 - ECC memory expansion board - Has 12 additional SIMM sockets - ECC Memory Board (with 12 SIMM Sockets) - Plugs into the Top of the System (Mother) Board (2 Can be Used) Retail
HP D3613-69001 - Processor board with a single 133MHz Pentium processor - Processor Board (with Single 133MHz Pentium Processor IC) - Plugs into the System (Mother) Board (2 Can Be Used) Retail
HP D3330-69011 - System PC board - With VGA, IDE and 2 Fast Wide SCSI-2 controllers - System (Mother) Board - with VGA, IDE and 2 Fast Wide SCSI-2 Controllers - Large Vertical Board in Center of Computer Retail
HP 5064-0739 - Control panel board - Includes the display and switches - Control Panel Board (Includes the Display and Switches) - Mounts to the Front Panel Retail
HP 5182-6734 - Fast wide SCSI ribbon cable kit (C3)- Two connector mounting screws and a cable marked Wide SCSI Channel B cable - 68-pin (M) connector to high density 68-pin (F) connector with latch clips for the rear panel - 47cm (18.5in) long - Fro Retail
HP D3330-60010 - NetServer cable kit - For adding drives or reconfiguring the system - Includes internal (C2) and external (C3) fast wide cables, and a narrow to fast wide adapter Retail
HP 5182-4550 - SCSI adapter (68-pin (F) to 50-pin (M)) - Used in some configurations for the CD-ROM drive and/or another Single-Ended SCSI drive (Narrow 8-bit to Fast Wide 16-bit) Retail
HP 5041-6342 - EISA Card guide - For the EISA slot boards - Mounts to the chassis assembly (Over the front panel fans) Retail
HP 5063-0328 - Bezel assembly - Plastic cover over the control panel PC board has cut outs for the switches and display Retail
HP 5964-3199 - HP NetServer service and support CD-ROM - Covers LC, LE, LF, LH, LH plus, LH pro, LM, LS, and LX. Retail
HP D3356-69001 - Processor board with a single socket for a 133MHz Pentium processor and six SIMM sockets - Processor Board (with a Single Socket for a 133MHz Pentium Processor IC and Six SIMM Sockets) - Plugs into the System (Mother) Board Retail
HP D3353-80208 - Self paced training kit for NetServer LH series - Includes student workbook, service manual, and test return envelope Retail
HP D4922-63001 - Firmware/software upgrade kit - Required when upgrading from the D2967A/B to the D2967C Remote Assistant assembly Retail
HP D2968-69005 - Remote assistant PC board assembly - Canada/US - With on-board modem - Remote Assistant PC Board Assembly (Canada/US) (D2968C) - with on-board Modem - When Upgrading from a D2968A/B to D2968C also Order Firmware/Software Upgrade Kit Retail
HP D2967-69004 - Remote assistant assembly - For outside of Canada/US - Without on-board modem - Remote Assistant Assy (for Outside of Canada/US) (D2967C) - without on-board Modem - When Upgrading from a D2967A/B to D2967C also Order Firmware/Softwar Retail
HP 5063-8400 - Ribbon cable with two self adhesive cable clamps and installation instructions - 8-pin (F) connector marked `NetServer` to 8-pin (F) connector marked `Remote Assistant` - 1.0m (39in) cable folded to be 63.5cm (25in) long - From Remote Retail
HP 5064-0795 - Autoranging power supply - 100-240VAC input, 350 watts - For worldwide use - Mounts to the rear panel Retail
HP C3610-69050 - Dual channel PCI Fast Wide SCSI disk array controller board - Dual Channel Fast Wide SCSI Disk Array Controller Board - (P/O C3610A) - Plugs into a PCI Board Slot on the System (Mother) Board Retail
