HP D4891AV - 16MB, 60nS, 36-bit parity ECC FPM SIMM memory module - Must be installed in sets of two for NetServer E-Series (product includes one SIMM) Retail
HP 5064-5819 - Ultra Wide SCSI-2 cable kit - Terminated internal ribbon cable with five high density 68-pin (M) connectors and one high density 68-pin (F) to 50-pin (F) adapter Retail
HP 8120-5548 - Single-Ended SCSI-2 interface cable with thumbscrews on both ends - 50-pin high density (M) to 50-pin high density (M) - 1.0m (3.3ft) long - (C2908A) Retail
HP 8120-5363 - Single-Ended SCSI-2 interface cable - 50-pin low density (M) with bail locks to 50-pin low density (M) with thumb screws - 1.0m (3.3ft) long - (K2284) Retail
HP 5182-4551 - Adapter - 68-pin (M) to 50-pin (M) - Used to connect 68-pin (F) device to 50-pin (F) SCSI ribbon cable Retail
HP 5002-3876 - Mounting tray/adapter - Mounting tray - For mounting a 3.5-inch hard drive in 5.25-inch slot in the front of the chassis Retail
HP 5064-5802 - Ultra Narrow SCSI-2 controller board - Ultra Narrow SCSI-2 Controller Board - Plugs Into Backplane PCI Slot Retail
HP 17-03718-10 - Power cable (White) - Used to supply power from a BA370 enclosure to a power supply module Retail
HP 5183-3780 - CD-ROM drive ribbon cable - Has two IDE drive connectors - From secondary IDE connector on the system processor board to one or two CD-ROMs Retail
HP 5064-4675 - Front bezel assembly - Includes front bezel, filler panels, keylock assembly, power button, lightpipe, latch assembly, and label Retail
HP 30457-60015 - Test load board - To check power supply in CPU or I/O extender - Test Load Bd - to Check Power Supply in CPU or I/O Extender Retail
HP 30243-69001 - LANIC board - LAN network interface board - LANIC Board - LAN Network Interface Board - Goes in Slot 3 of the CPU Unit (as an Option Board) Retail
HP 30462-69001 - 2MB memory board - 2MB Memory Board - Can Go in Slot 2 of CPU Unit (Optional) - Can Also Go in Slot 3 (as an Additional Option Board - But the Memory Board in Slot 2 MUST Also be 2MB) Retail
HP 30456-69001 - 1MB memory board - 1MB Memory Board - Can Go in Slot 2 of CPU Unit (Optional) - Can Also Go in Slot 3 (as an Additional Option Board - But the Memory Board in Slot 2 MUST Also be 1MB) Retail
HP 30461-69001 - 0.5MB memory board - 0.5MB Memory Board - Goes in Slot 2 of CPU Unit (Standard) - Can Also Go in Slot 3 (as an Additional Option Board - But the Memory Board in Slot 2 MUST Also be 0.5MB) Retail
HP 30466-60001 - ATP interface assembly - Includes upper and lower connector boards (Each with three 3 pin RS-232C connectors) - Mounts to rear panel - ATP Interface Assembly - Includes Upper and Lower Connector Boards (Each with Three 3 Pin RS-232C Retail
HP 30460-69008 - Terminal interface controller (TIC/ATP 37) board - Goes in slot 1 of CPU unit (Standard) - Can also go in slot 3 (as an additional option board) - Terminal Interface Controller (TIC/ATP 37) Board - Goes in Slot 1 of CPU Unit (Standar Retail
HP 30459-69002 - Peripheral interface controller (PIC) board (HP-IB interface board) - Peripheral Interface Controller (PIC) Board (HP-IB Interface Board) - Goes in Slot 5 ONLY if No Other Boards are in the I/O Extender Unit (Moved from Slot 4 in CPU Retail
HP 3160-0485 - Tubeaxial fan (EBM Industries or Papst Mechatronic, 4112GXL) - 105mm (4.126in) mounting hole spacing, 38.1mm (1.5in) thick, 12VDC, 50CFM - (New style) - Mounts to the rear panel Retail
HP 1420-0343 - Battery and fuse assembly - For power back-up - Mounts to the front panel side of the backplane board Retail
