HP C5732A - Rail kit for mounting internal tape drives in Power Edge 2300, 4100, 4200, 6100, and 6300 servers Retail
HP C7436A - DDS-4 (DAT) autoloader magazine pre-loaded with five 150m DDS-4 data tapes and one cleaning tape Retail
HP 5063-4251 - Hub accessory kit - Includes two rack mount ears, four rack mount screws, four hub mount screws, and two special cable ties (for front panel cable management guide) Retail
HP J3028-61001 - 100VG transceiver module assembly - Has one RJ-45 Unshielded Twisted Pair (UTP) connector - (J3028A) Retail
HP J3027-61001 - 100VG fiber-optic transceiver module assembly - Has one (Tx/Rx) dual ST type connector - (J3027A) Retail
HP J2608-61001 - ThinLAN transceiver module - Has one BNC connector (10Base-2 port) - (J2608A) Retail
HP J2607-61001 - EtherTwist transceiver module - Has one RJ-45 connector (10Base-T port) - (J2607A) Retail
HP J2603-61001 - AdvanceStack EtherTwist (10Base-T) SNMP module - Provides `In-band` network management for up to 16 hubs - (J2603A) Retail
HP J2962-69001 - Redundant power supply assembly - Has two AC line inputs and four DC outputs for supplying up to four AdvanceStack devices (Separate rack mountable unit) Retail
HP J2585-69011 - 32-bit PCI LAN interface board - RJ-45 connectors - Supports both EtherTwist 10Base-T and 100VG/802.12 - (J2585B, part of J3009B, part of of J3010B) Retail
HP J2577-69001 - EISA 32-bit LAN interface board - Has two RJ-45 connectors - One 10M bits/s 10Base-T and one 100M bits/s 100VG/802.12 - EISA 32-Bit LAN Interface Board - has Two RJ-45 Connectors - One 10M bits/s (10Base-T) and One 100M bits/s (100VG Retail
HP J2573-69001 - ISA 16-bit LAN interface board - Has two RJ-45 connectors - One 10M bits/s 10Base-T and one 100M bits/s 100VG/802.12 - ISA 16-Bit LAN Interface Board - has Two RJ-45 Connectors - One 10M bits/s (10Base-T) and One 100M bits/s (100VG/8 Retail
HP 92214U - ThinLAN cable assembly - Includes BNC (M) to BNC (M) cable 0.5m (1.7ft) long, BNC tee connector (M) and two (F) , and 50 ohm (M) terminator - For hub to hub connection Retail
HP J3235-69001 - AdvanceStack hub 8TXE assembly - Has eight (F) RJ-45 connectors (100Base-T ports) and one MDI cascade port (Note: port 8 cannot be used if MDI cascade port is used) - (Part of J3235A) Retail
HP 365963-001 - Miscellaneous hardware kit - Includes rear removable bracket, floppy tray bracket, floppy retainer bracket, SCSI high density slot cover, blank PCI cover, and screws Retail
HP C1571-60010 - Empty DDS (DAT) autoloader magazine - Holds five data tapes and one cleaning tape Retail
HP J2606-61001 - Fiber-optic transceiver module (J2606A) - Has one transmit and receive (Tx/Rx) dual connector (10Base-FL port) Retail
HP 1252-5634 - Single-ended SCSI active terminator - Has 50 pin low density (M) connector with bail locks Retail
HP 1252-3920 - Single-Ended SCSI active terminator - Has 50-pin low density connector (M) with bail locks - (K2291) Retail
HP K2285-60001 - SCSI interface cable - 50-pin low density (M) bail lock to 50-pin high density (M) latch/clip - 1.5m (4.9ft) long - (K2285) Retail
HP K2286-60001 - SCSI interface cable - 50-pin low density (M) bail lock to 50-pin high density (M) latch/clip - 1.0m (3.3ft) long - (K2286) Retail
HP 5062-3383 - SCSI interface cable - 50-pin high density (M) thumbscrew to 50-pin low density (M) bail lock - 1.0m (3.3ft) long Retail
HP 5063-1212 - Single-Ended SCSI-2 interface cable with bail locks on both ends - 50-pin low density (M) to 50-pin low density (M) - 3.0m (9.8ft) long - (C2927A) Retail
HP 8120-5159 - Single-Ended SCSI-2 interface cable with bail locks on both ends - 50-pin low density (M) to 50-pin low density (M) - 2.0m (6.6ft) long - (92222C) Retail
HP 8120-5158 - Single-Ended SCSI-2 interface cable with bail locks on both ends - 50-pin low density (M) to 50-pin low density (M) - 0.5m (1.6ft) long - (92222A, part of 98658A) Retail
