NBN4-12GM50-E2-V1 - M12 Inductive Proximity Switch 4 mm Non-Flush PNP NO M12 Plug
Description
Compact cylindrical inductive proximity switch for non-contact metal detection. M12 threaded body with non-flush mounting delivers a 4 mm nominal sensing range. The -V1 variant features a standard M12 connector (no cable) and a PNP normally-open output for 5–36 VDC control systems.
Technical Specifications
- Model: NBN4-12GM50-E2-V1
- Sensing Principle: Inductive
- Rated Sensing Distance (sn): 4 mm (non-flush)
- Assured Sensing Distance (sa): 0…3.24 mm
- Installation: Non-flush
- Output Type/Function: 3-wire PNP, Normally Open (NO)
- Supply Voltage (UB): 5…36 VDC
- Load Current: 0…200 mA
- Protection: Short-circuit and reverse-polarity protected
- Voltage Drop (Ud): ≤ 1 V
- No-Load Supply Current: ≤ 10 mA
- Off-State Current: ≤ 20 μA
- Switching Frequency: 0…2650 Hz
- Hysteresis (typ.): ≈5% of sn
- Housing / Face: Nickel-plated brass body; PBT sensing face
- Thread / Size: M12×1, body length ~50 mm
- Indicators: Yellow status LED
- Connection: M12 plug (A-coded), 3-pin, straight
- Ingress Protection: IP68
- Operating Temperature: −40…+85 °C
- Included Hardware: 2× self-locking M12 nuts
✅ Confirmed Compatibility
Please note that the following list is not exhaustive. Compatibility depends on your mounting (non-flush), target size/material, and control I/O polarity. Match by the exact model code and electrical specs to your system.
✔ Applications: Part presence/position sensing on fixtures, indexing tables, EOAT, conveyor tooling where M12, non-flush, 4 mm, PNP NO, and M12 plug connection are required.
