109E5724C508 - 172x150x51mm DC24V 2.3A 3-Pin Connector Aluminum Frame Heavy Duty Industrial Cooling Fan
Heavy-duty aluminum-frame axial fan for industrial and automation equipment. Designed for continuous operation with strong, directional airflow and tach output monitoring.
Technical Specifications
- MFG: San Ace
- Model Number: 109E5724C508
- Fan Type: DC axial cooling fan
- Dimensions: 172 × 150 × 51 mm (ø172 mm outer ring, 150 mm frame width, 51 mm thickness)
- Voltage: 24 V DC
- Current: 2.3 A
- Power: up to ~55 W
- Bearing: Ball bearings
- Speed Control: Fixed-speed (no PWM)
- Connector: 3-pin (Power +, Ground, Tach/RPM)
- Material: Die-cast aluminum frame, reinforced plastic impeller
- Operating Temp: -10 °C to +70 °C (typical for series)
Interchangeable / Replacement Part Numbers
109E5724C508 (this item), 109E5724C505, 109E5724C507, 109E5724C502.
Same San Ace 172 24V family and 172 × 150 × 51 mm footprint. Always confirm lead count/connector before substituting.
✔️ Confirmed Compatibility
Not exhaustive. Fit depends on mounting size, connector, and airflow requirement.
Industrial & Automation Equipment
✔️ Control cabinets, CNC/PLC enclosures
✔️ Power supplies and UPS cooling
✔️ Networking and telecom chassis
✔️ Inverters and servo drive cooling
Mechanical Fit
✔ Standard 172 mm round frame with 150 mm mounting width and 51 mm thickness (common San Ace 172 pattern)
☑️ Key Features
☑️ Rugged aluminum housing for heat resistance and rigidity
☑️ 3-pin harness with tach output for RPM monitoring
☑️ High-airflow design suitable for dense electronics
☑️ Long-life ball bearings for 24×7 duty
⚙️ Fit Notes
- Confirm your system provides 24 V DC and a 3-pin fan header or adapter.
- Observe airflow/rotation arrows on the housing when installing.
- Mounting tabs can extend slightly beyond 150 mm; allow clearance in tight bezels.
- For heatsink or CPU-adjacent installs, apply fresh thermal compound: Shin-Etsu G751 link here.
