572252-001 572071-B21 MK0060EAVDR 60GB 3G SATA 2.5" SFF Hot-Plug Midline SSD

This genuine OEM solid-state drive provides 60GB of enterprise storage through a SATA 3Gb/s interface. It is supplied in the standard 2.5-inch SFF hot-plug configuration used by compatible ProLiant servers, blade systems, storage blades, and network-storage systems.

Part number 572252-001 is the spare number corresponding to option part number 572071-B21. Other documented identifiers include hot-plug assembly number 539557-007, drive assembly number 570774-001, and model number MK0060EAVDR.

This listing is specifically for the standard 2.5-inch SFF hot-plug version. Non-hot-plug, quick-release, and 3.5-inch carrier versions of the related 60GB drive are separate assemblies and should not be treated as direct replacements without confirming the carrier, backplane, and controller configuration.

⚠️ Important Capacity and Form-Factor Correction

The correct capacity for 572071-B21 and 572252-001 is 60GB.

These numbers should not be described as a 64GB drive. The 64GB 461203-B21 belongs to an earlier SATA 1.5Gb/s non-hot-plug product family and is not a direct interchangeable replacement.

The configured hot-plug product is documented as a 15mm-height SFF assembly. A bare internal SSD mechanism found inside some assemblies may have a different physical case height, but the complete hot-plug product should not be advertised as a universal 9.5mm laptop SSD.

Technical Specifications

• Product Type: Enterprise solid-state drive
• Drive Capacity: 60GB
• Interface: SATA
• Maximum Interface Rate: 3Gb/s
• Form Factor: 2.5-inch SFF
• Configured Product Height: 15mm
• Drive Type: Midline solid-state drive
• Installation Type: Hot-plug
• Carrier Type: Standard 2.5-inch SFF hot-plug carrier
• Sector Format: 512-byte logical blocks
• Rotational Speed: Not applicable
• Documented Sequential Read Performance: Up to 230MB/s
• Documented Sequential Write Performance: Up to 180MB/s
• Documented Random Read Performance: Greater than 20,000 IOPS
• Documented Random Write Performance: Greater than 5,000 IOPS
• Documented Power Consumption: Approximately 2W
• Documented Operating Temperature: 0°C to 60°C
• Firmware Type: OEM-qualified enterprise firmware
• Application: Compatible ProLiant servers and storage systems using the matching standard SFF SATA hot-plug configuration
• Included Hardware: Drive only unless the listing photographs or condition notes specifically show a carrier or additional hardware

Interchangeable / Replacement Part Numbers

572071-B21, 572071-S21, 572071R-B21, 572252-001, 539557-007, 570774-001, MK0060EAVDR, MCB4E60G5MXP, MCB4E60G5MXP-0VBH3

Part-Number Reference Guide

572071-B21: Original option or sales part number for the 60GB 3G SATA SFF hot-plug Midline SSD
572071-S21: Smart Buy sales reference for the same 60GB hot-plug option
572071R-B21: Renewed or refurbished channel reference for the 572071-B21 option
572252-001: Spare or service-replacement number
539557-007: Documented standard hot-plug drive assembly number
570774-001: Drive or subassembly number found within multiple 60GB configurations
MK0060EAVDR: Model number associated with the 60GB SATA hot-plug drive
MCB4E60G5MXP / MCB4E60G5MXP-0VBH3: Samsung OEM model references documented on certain production builds

Production revisions may use different internal flash-memory or controller builds while retaining the same option and spare numbers. Match the spare number, carrier type, capacity, interface, and model label rather than relying on the internal manufacturer number alone.

⚠️ Related Numbers That Are Not Direct Assembly Replacements

461203-B21: Earlier 64GB SATA 1.5Gb/s non-hot-plug SSD. It is not the same product as 572071-B21 or 572252-001.

572075-B21 / 572254-001 / 539557-008: Related 60GB SATA 3Gb/s non-hot-plug configuration. The electrical drive family may be related, but the complete assembly and installation method are different.

586585-B21 / 586656-001: Related 60GB SATA 3Gb/s quick-release carrier configuration. This is not the same carrier assembly as the standard 572071-B21 hot-plug version.

570761-B21: Related 60GB SATA SSD supplied in an LFF or 3.5-inch carrier configuration. It is not a direct replacement for a 2.5-inch SFF assembly.

Do not substitute these related numbers unless the correct carrier, drive bay, backplane, and controller arrangement has been verified.

RAID Controller and Firmware Compatibility

The original documentation lists support with the following Smart Array controller families:

✔️ Smart Array P212
✔️ Smart Array P410
✔️ Smart Array P411
✔️ Smart Array P711m
✔️ Smart Array P712m
✔️ Smart Array P812

Controller firmware should be updated to the latest revision supported by the server before installing the SSD.

The D2200sb Storage Blade requires Smart Array firmware revision 5.06 or later for documented SATA Midline SSD support.

Use only a controller and firmware combination approved for the target server. Drive detection alone does not guarantee complete RAID management, health reporting, or wear-status support.

✅ Confirmed Compatibility

Compatibility applies only to systems equipped with a compatible 2.5-inch SFF SATA hot-plug bay, standard-generation carrier or backplane, and supported storage controller. The same server model may have been sold with SFF, LFF, hot-plug, and non-hot-plug configurations.

✔️ ProLiant BL Series: BL460c G6, BL460c G7, BL465c G6, BL465c G7, BL490c G7, BL620c G7, BL680c G7, BL685c G6, BL685c G7
✔️ ProLiant Workstation Blade: WS460c G6 configurations using the matching SFF SATA hot-plug assembly
✔️ ProLiant DL100 Series: DL160 G6, DL165 G7, DL170h G6, DL180 G6
✔️ ProLiant DL300 Series: DL320 G6, DL360 G6, DL360 G7, DL370 G6, DL380 G5, DL380 G6, DL380 G7, DL385 G5p, DL385 G6, DL385 G7
✔️ ProLiant DL500 Series: DL580 G5, DL580 G7, DL585 G5, DL585 G6, DL585 G7
✔️ ProLiant DL700 and DL900 Series: DL785 G5, DL785 G6, DL980 G7
✔️ ProLiant ML350 Series: ML350 G5 and ML350 G6 configurations using the matching SFF SATA hot-plug backplane
✔️ ProLiant ML370 Series: ML370 G5, ML370 G6
✔️ ProLiant SL Series: SL390s G7 configurations using the matching 2.5-inch SATA hot-plug assembly
✔️ Storage Blades: D2200sb Storage Blade with Smart Array firmware 5.06 or later; SB40c Storage Blade configurations supporting 3G SATA SFF drives
✔️ StorageWorks X1000 Series: Configurations equipped with compatible SFF SATA hot-plug bays and supported Smart Array controllers
✔️ StorageWorks X3000 G2 Series: Configurations equipped with compatible SFF SATA hot-plug bays and supported Smart Array controllers

☑️ Key Features

☑️ Genuine OEM enterprise solid-state drive
☑️ Correct documented capacity of 60GB
☑️ SATA 3Gb/s interface
☑️ Standard 2.5-inch SFF hot-plug configuration
☑️ OEM-qualified firmware for compatible ProLiant and StorageWorks systems
☑️ No mechanical moving components
☑️ Approximately 2W documented power consumption
☑️ Up to 230MB/s sequential read performance
☑️ Up to 180MB/s sequential write performance
☑️ Greater than 20,000 documented random-read IOPS
☑️ Greater than 5,000 documented random-write IOPS
☑️ Cross-referenced to option number 572071-B21
☑️ Cross-referenced to spare number 572252-001
☑️ Cross-referenced to assembly number 539557-007
☑️ Documented model number MK0060EAVDR
☑️ Suitable for compatible legacy enterprise server and storage applications

⚙️ Fit and Installation Notes

• This page is for the standard 2.5-inch SFF hot-plug version.
• Confirm the complete spare number and assembly number before ordering.
• Confirm that the system has a 2.5-inch SFF backplane rather than 3.5-inch LFF bays.
• Confirm that the server uses hot-plug bays rather than non-hot-plug drive connections.
• This standard-generation carrier should not be confused with later Smart Carrier assemblies used by newer server generations.
• A bare drive mechanism may require transfer to the original compatible carrier before installation.
• Carrier mounting holes, release mechanisms, and activity indicators must match the original assembly.
• Do not treat 461203-B21 as interchangeable; it is a different 64GB SATA 1.5Gb/s non-hot-plug product.
• Do not treat 572075-B21, 572254-001, or 539557-008 as direct replacements; those numbers identify the non-hot-plug configuration.
• Do not treat 586585-B21 or 586656-001 as direct carrier replacements; those numbers identify a quick-release configuration.
• Do not use the drive in a SAS-only system that does not support SATA devices.
• Update the Smart Array controller firmware before installation.
• Back up all important data before replacing or initializing a drive.
• RAID initialization, secure erase, and firmware-management procedures can permanently delete existing data.