OEM Used Li-Ion Battery for iPhone 4 A1332 A1349 616-0521 616-0513

Used OEM internal Li-Ion replacement battery for iPhone 4 A1332 and A1349 models. This battery is intended mainly for short-term diagnostic, data recovery, repair testing, or temporary power-on use when working with older iPhone 4 devices. Because these are used OEM batteries, charge capacity and runtime are not guaranteed. This battery may power on a device for testing, but it should not be purchased with the expectation that it will hold a strong charge for daily use.

Condition / Charge Notice

• Condition: Used OEM battery
• Charge Capacity: Not guaranteed
• Runtime: Not guaranteed
• Recommended Use: Short-term power-on, testing, diagnostics, and data recovery support
• Not Recommended For: Customers needing a fresh daily-use battery with strong charge retention
• Warranty: Sold AS-IS with no warranty. 

Technical Specifications

• Primary Part Number: 616-0520
• Part Type: Internal smartphone battery
• Battery Chemistry: Li-Ion / Lithium-Ion rechargeable battery
• Capacity: 1420mAh
• Voltage: 3.7V
• Watt Hours: 5.25Wh
• Device Compatibility: iPhone 4
• Compatible Model Numbers: A1332, A1349
• Connector Type: Internal battery flex connector
• Installation Type: Internal battery replacement
• Application Type: Short-term power-on, testing, diagnostics, repair bench use, and data recovery support
• Condition Detail: Used OEM pull with charge health not guaranteed

Interchangeable / Replacement Part Numbers

616-0520, 616-0521, 616-0513, 616-0512, LIS1445APPC

✅ Confirmed Compatibility

Please note that the following list is not exhaustive. Compatibility depends on your device’s specific configuration. It’s essential to verify compatibility with your original battery part number, phone model number, connector style, and battery size prior to installation.

✔ iPhone 4 GSM Models: A1332, 8GB, 16GB, 32GB
✔ iPhone 4 CDMA Models: A1349, 8GB, 16GB, 32GB

Recommended Use Examples

✓ Powering on an older iPhone 4 long enough to check whether the device boots
✓ Temporary use for pulling photos, contacts, notes, or other stored data
✓ Testing a phone with a completely dead or missing original battery
✓ Checking LCD, charging port, dock connector, speaker, camera, or board functionality
✓ Repair bench testing before deciding whether a device is worth fully refurbishing
✓ Verifying device condition, serial information, activation screen, or basic functionality

☑️ Key Features

☑️ Used OEM battery for compatible iPhone 4 models
☑️ Interchangeable with 616-0520, 616-0521, and 616-0513 battery part numbers
☑️ Useful for short-term power-on and diagnostic testing
☑️ Helps support data recovery attempts from older devices
☑️ Internal flex connector design for matching iPhone 4 battery connection
☑️ 1420mAh 3.7V battery specification for compatible A1332 and A1349 models
☑️ Good option when a device needs to be tested but long battery runtime is not required

⚙️ Fit Notes

✓ These are used OEM batteries and charge performance is not guaranteed
✓ Battery may not hold a strong charge and may only be suitable for short-term use
✓ Best suited for diagnostics, testing, temporary power-on, and data recovery situations
✓ Not recommended as a fresh daily-use battery replacement
✓ Confirm your phone is an iPhone 4, not a 4S or newer model
✓ Confirm your original battery part number matches 616-0520, 616-0521, 616-0513, or a compatible equivalent
✓ Compare the connector, battery shape, and label layout before installation
✓ Professional installation is recommended for internal phone repairs
✓ Do not bend, puncture, crush, or install a swollen or physically damaged battery
✓ If the device requires reliable daily battery life, a new battery should be used instead