Restore or modernize legacy equipment that requires a standard 2.5-inch 44-pin IDE/PATA drive. This 64GB solid-state replacement receives power through the integrated IDE connector and provides quiet, vibration-resistant storage without the moving parts found in older mechanical hard drives.
TS64GSSD25-M, TS64GSSD25-S, TS64GPSD330, TS64GPSD520, KSD-PA25.6-064MS, KSD-PA25.1-064MS, KSD-PA25.1-064MJ, PA25-64, FHM64GW25H, FHD64GW25H, AP-FD25C23E0064GS-5TM, AP-FD25C23E0064GS-W5TM, DGP25-64GD70BC1QC, DGP25-64GD70BW1QC, DGP25-64GD67AC1QC, CIS-2PM120TIC064GS, CIS-2PM120TIC064GW, YSPA25-64, YSPA25-64S
These references share the 64GB 2.5-inch 44-pin PATA/IDE storage format. Firmware behavior, drive height, device configuration, flash type, and operating-temperature rating may differ. Verify the requirements of the host equipment before substitution.
Need to initialize, format, clone, back up, or access this SSD through USB? This compatible enclosure accepts standard 2.5-inch 44-pin IDE/PATA drives and connects to a computer through USB 2.0.
The enclosure is USB-powered and includes a USB cable, screwdriver, and mounting screws. No separate AC adapter is required.
Purchase a Compatible 2.5-Inch USB 2.0 44-Pin IDE ATA PATA External Enclosure
Compatibility requires a standard 2.5-inch 44-pin PATA/IDE drive bay and host firmware capable of recognizing a 64GB drive. The original caddy, rails, pull tab, or connector interposer may need to be transferred from the existing drive.
✔️ ThinkPad Systems: T30, T40, T40p, T41, T41p, T42, T42p, R40, X30, and X31 configurations originally equipped with a 2.5-inch IDE/PATA hard drive
✔️ Latitude Systems: D600 configurations using the original IDE drive caddy and pin interposer
✔️ nc6000 Systems: Configurations originally equipped with a removable 2.5-inch IDE/ATA hard drive
✔️ iBook G4 Systems: Early 2004 and other configurations using a standard 2.5-inch Ultra ATA drive
✔️ PowerBook G4 Systems: DVI, Titanium, and applicable 12-inch or 15-inch configurations using a standard 2.5-inch Ultra ATA drive
✔️ Legacy Laptops and Tablet PCs: Systems originally using a 2.5-inch 44-pin 9.5mm IDE/PATA hard drive
✔️ Industrial Equipment: CNC controls, robotics controllers, industrial computers, panel PCs, operator terminals, and HMI systems using standard 44-pin PATA storage
✔️ Embedded Applications: Embedded PCs, thin clients, data-collection systems, machine controllers, and automation equipment
✔️ Commercial Systems: Point-of-sale terminals, kiosks, ticketing systems, arcade systems, and digital signage controllers
✔️ Technical Equipment: Laboratory instruments, diagnostic equipment, test stations, telecommunications appliances, and network equipment using standard 2.5-inch IDE storage
✔️ Legacy Operating Environments: DOS, Windows 95, Windows 98, Windows ME, Windows 2000, Windows XP, and compatible Linux installations subject to BIOS and partitioning limitations
✔️ MHS / MHT / MHV / MHW Series: MHS2060AT, MHT2060AH, MHT2060AS, MHT2060AT, MHV2060AH, MHV2060AS, MHV2060AT, MHW2060AC, MHW2060AT
✔️ DK23 / HTE / HTS Series: DK23EA-60, DK23FA-60, DK23FB-60, HTE541660J9AT00, HTS421260H9AT00, HTS541060G9AT00, HTS541260H9AT00, HTS541660J9AT00, HTS548060M9AT00, HTS721060G9AT00, HTS726060M9AT00
✔️ IC25 Series: IC25N060ATMR04-0, IC25T048ATDA05-0, IC25T060ATCS05-0
✔️ HM / MP Series: HM060HC, HM061GC, MP0603H
✔️ ST Series: ST96023A, ST960812A, ST960815A, ST960821A, ST96812A
✔️ HDD / MK Series: HDD2183, MK6021GAS, MK6022GAX, MK6025GAS, MK6026GAX, MK6032GAX, MK6034GAX
✔️ WD Series: WD600UE, WD600VE
These mechanical-drive references are replacement targets rather than identical SSD part numbers. The SSD can replace compatible 2.5-inch PATA hard drives with equal or lower required capacity when the host supports 64GB addressing and the physical interface matches.
☑️ Native 2.5-inch 44-pin IDE/PATA interface
☑️ Integrated data and 5V power connection
☑️ No SATA converter or separate power cable required
☑️ No moving parts for improved vibration and shock resistance
☑️ Silent operation compared with mechanical hard drives
☑️ Faster access times than many aging 4200 RPM and 5400 RPM drives
☑️ Suitable for legacy computers that do not support SATA or NVMe storage
☑️ Useful for restoring discontinued industrial and embedded equipment
☑️ Supports fresh operating-system installations or cloning from an existing drive
☑️ Compatible external USB enclosure available separately for setup and data access
✓ One 64GB 2.5-inch 44-pin IDE/PATA solid-state drive
Original drive caddies, rails, interposers, screws, operating-system software, and the external USB enclosure are not included.
✓ Confirm that the system requires a 2.5-inch 44-pin IDE/PATA drive. This is not compatible with SATA, SAS, mSATA, M.2, 1.8-inch ZIF, 1.8-inch 50-pin IDE, or 3.5-inch 40-pin desktop IDE connections.
✓ Transfer the original caddy, side rails, pull tab, rubber bumpers, mounting screws, and pin interposer when required by the system.
✓ Carefully align Pin 1 before installation. Connecting a 44-pin drive off-center or with incorrect orientation can damage the drive or host equipment.
✓ Verify the required Master, Slave, or Cable Select configuration. A matching 44-pin connector does not guarantee the correct device setting.
✓ Confirm that the system BIOS supports a 64GB drive. Some very old equipment may have 8.4GB or 32GB capacity limitations even though 64GB is below the common 137GB 28-bit LBA limit.
✓ The drive ships blank and must be partitioned, formatted, cloned, or loaded with an operating system before use.
✓ Legacy BIOS-based systems should generally use an MBR partition table rather than GPT.
✓ A marketed capacity of 64GB normally appears as approximately 59.6GiB before formatting because decimal and binary capacity measurements differ.
✓ Windows XP cannot create FAT32 partitions larger than 32GB with its built-in formatting utility. Use NTFS, multiple partitions, or a suitable external formatting utility when a larger FAT32 volume is required.
✓ Actual transfer speed is limited by the host controller. The SSD may negotiate down to ATA-66, ATA-33, DMA, or PIO mode in older equipment.
✓ Legacy PATA controllers and operating systems may not support TRIM. The drive can still operate, but it should not be expected to provide modern SATA or NVMe maintenance behavior.
✓ Specialized industrial equipment may require a particular firmware identity, disk geometry, security setting, or fixed-disk response. Confirm these requirements before replacing storage in proprietary machinery.
✓ Back up or clone the original drive before removal whenever its data remains accessible.
✓ This drive is not hot-swappable unless the host-equipment manufacturer specifically supports hot swapping.
