92mm 6-Pin Rear System Cooling Fan for ProLiant ML10 Server

The 732595-001 is a rear system cooling fan assembly for compatible ProLiant ML10 servers. It mounts to the rear panel of the chassis and connects to the system board to help maintain airflow through the server.

This 12V DC fan measures 92mm x 92mm x 32mm and includes an approximately 16-inch cable with a 6-pin connector. It is a replacement for the matching rear system fan assembly.

Package Includes

• 1 x 92mm rear system fan with attached cable and connector

Technical Specifications

• Primary Spare Part Number: 732595-001
• Fan Model: AFC0912DF-DA45
• Part Type: Rear system / chassis cooling fan
• Fan Style: Tubeaxial
• Dimensions: 92mm x 92mm x 32mm
• Operating Voltage: 12V DC
• Current Rating: 1.43A for the AFC0912DF-DA45 version
• Connector: 6-pin
• Cable Length: Approximately 16 inches
• Mounting Location: Rear panel of server chassis
• Connection: System board fan connector
• Application: Server chassis cooling

Part Number and Model References

730634-001, 732595-001, AFC0912DF-DA45, T92C12MS5A7-08T02

732595-001 and AFC0912DF-DA45 identify the fan described on this page. 730634-001 and T92C12MS5A7-08T02 are related ML10 fan references; fan versions can have different current ratings, dimensions, wiring, or connector arrangements. Verify the complete assembly before using an alternate reference.

➕ Related Cooling Parts

Need the processor cooler as well? The following is a separate component for compatible ML10 servers:

732596-001 Processor Heatsink and Fan Assembly for ProLiant ML10

The processor heatsink and fan assembly is sold separately and is not a replacement for this rear system fan.

⚠️ Check Your ML10 Generation

ML10, ML10 v2, and ML10 Gen9 are different server versions. Later versions may use a different rear fan assembly. Match the original fan and connector before ordering.

686748-001 Rear System Fan Assembly for ML10 v2

842937-001 Rear Chassis Fan for ML10 Gen9

✔️ Confirmed Compatibility

Confirm your server generation and compare the original fan’s part number, dimensions, connector, cable length, and mounting arrangement before ordering.

✔️ ProLiant ML10: Original ML10 tower server, rear system fan position
✔️ ML10 Pentium G2130 configurations: Including 730651-001 and 730651-AA1
✔️ ML10 Xeon E3-1220 v2 configurations: Including 737649-S01 and 757643-425
✔️ ML10 Xeon regional configurations: 757643-295, 757643-375, 757643-AA5

Note: The numbers in this compatibility section identify complete server configurations, not fan part numbers.

☑️ Key Features

• Replacement rear system fan for compatible ProLiant ML10 servers
• 92mm x 92mm x 32mm tubeaxial fan assembly
• 12V DC operation with a 1.43A rating for the specified fan model
• Attached approximately 16-inch cable with a 6-pin connector
• Mounts at the rear of the server chassis to support internal airflow
• Useful for replacing a failed, noisy, damaged, or intermittent system fan

⚙️ Fit Notes

• Match the original fan spare number and verify the server’s exact ML10 generation.
• Confirm the 92mm x 92mm x 32mm frame, mounting holes, and rear-panel clearance.
• Compare the 6-pin connector housing, keying, wire positions, and cable length.
• Do not assume all fans marked AFC0912DF use the same cable or connector.
• Alternate fan references may have different electrical or physical specifications.
• Disconnect power before servicing and reinstall the fan in the original airflow orientation.