TPM-L R2.0 20-1 Pin LPC TPM 2.0 Module for Select X99 C612 Motherboards

This TPM-L R2.0 discrete security module provides TPM 2.0 functionality for select motherboards, workstations, and servers equipped with the correct 20-1-pin LPC TPM header and supported BIOS firmware.

Compatibility is determined by the motherboard’s exact pin definition and BIOS—not by connector appearance alone. Many older motherboards have a similar 20-1-pin connector but support only TPM 1.0 or TPM 1.2.

Technical Specifications

• Model: TPM-L R2.0
• Part Number: 90MC0410-M0XBN0
• Product Type: Discrete Trusted Platform Module
• TPM Specification: TPM 2.0
• Security Controller: Infineon SLB 9665 family
• System Interface: LPC
• Motherboard Connector: Keyed 20-1-pin TPM header
• Cryptographic Support: SHA-1, SHA-256, RSA, ECC, ECDH, and HMAC
• PCB Revision: May vary; pictured module is REV. 1.00
• Included Quantity: One TPM-L R2.0 module
• Additional Items: No screw, cable, bracket, retail box, or printed manual included

Interchangeable / Replacement Part Numbers

TPM-L R2.0, 90MC0410-M0XBN0

⚠️ Critical Compatibility Warning

This module is not compatible with every motherboard that has a 20-1-pin TPM connector. The motherboard BIOS must specifically support TPM 2.0 or the TPM-L R2.0 module.

Older boards may use the same physical connector while supporting only TPM 1.0 or TPM 1.2. This module is also physically incompatible with 14-1-pin TPM-M R2.0 and TPM-SPI connectors.

Always check the exact motherboard manual and BIOS support page before ordering.

✅ Confirmed Compatibility

The following models have documentation showing a 20-1-pin TPM connector together with explicit TPM 2.0 or TPM-L R2.0 BIOS support. Install the stated BIOS version or a later applicable release.

X99 Workstation Motherboards
✔️ X99-E WS: BIOS 3502 or later

TUF Motherboards
✔️ SABERTOOTH Z87: BIOS 2302 or later; officially documented non-X99 exception

C612 Workstation and Server Motherboards
✔️ Z10PA-D8: BIOS 3208 or later
✔️ Z10PR-D16: BIOS 3307 or later
✔️ Z10PH-D16: BIOS 3307 or later

Systems Using the Z10PR-D16
✔️ Rack Servers: RS400-E8-PS2, RS500-E8-PS4, RS500-E8-PS4 V2, RS500-E8-RS4, RS520-E8-RS8, RS540-E8-RS36-ECP with BIOS 3307 or later

Systems Using the Z10PH-D16
✔️ Rack Server: RS720Q-E8-RS8-P with BIOS 3307 or later

Systems Using the Z10PP-D24
✔️ Rack Servers: RS700-E8 and RS720-E8 families with BIOS 3407 or later, including RS700-E8-RS8 and RS720-E8-RS12-X

Systems Using the Z10PG-D16
✔️ GPU Servers: ESC4000 G3 and ESC4000 G3S with BIOS 3404 or later

20-1-Pin X99 Models Requiring Additional Verification

The following boards document a 20-1-pin TPM connector. However, available support notes do not explicitly identify TPM-L R2.0 or TPM 2.0. Verify recognition of TPM 2.0 in the exact motherboard manual and BIOS before ordering.

⚠️ X99 Models With BIOS 3505 TPM Fix: X99-A, X99-A/USB 3.1, X99-DELUXE, X99-DELUXE/U3.1, X99-PRO, X99-PRO/USB 3.1, X99-S, SABERTOOTH X99
⚠️ Additional 20-1-Pin X99 Models: X99-E WS/USB 3.1, X99-M WS, X99-M WS/SE, X99-WS/IPMI, X99-E-10G WS, RAMPAGE V EXTREME, RAMPAGE V EXTREME/U3.1
⚠️ Additional 20-1-Pin C612 Models: Z10PE-D8 WS, Z10PE-D16 WS, Z10PE-D16, Z10PE-D16/4L, Z10PE-D16/10G-2T, Z10PA-U8, Z10PA-D8C

Known Incompatible X99 Models

❌ X99-A II: Uses an incompatible 14-1-pin TPM header
❌ X99-DELUXE II: Uses an incompatible 14-1-pin TPM header
❌ X99-E Consumer Model: Uses an incompatible 14-1-pin header; do not confuse it with the compatible X99-E WS
❌ ROG STRIX X99 GAMING: Uses an incompatible 14-1-pin TPM header
❌ ROG RAMPAGE V EDITION 10: Uses an incompatible 14-1-pin TPM header
❌ P10S and P11C Server Families: Use incompatible 14-1-pin TPM headers
❌ General X79 and Z97 Models: Do not assume compatibility from the 20-1-pin connector; no TPM 2.0 confirmation was found. SABERTOOTH Z87 is the specifically documented older exception.

☑️ Key Features

☑️ TPM-L R2.0 discrete security module
☑️ TPM 2.0 functionality for supported motherboards
☑️ Infineon SLB 9665-family security controller
☑️ Keyed 20-1-pin LPC motherboard connection
☑️ Hardware-backed key storage and platform-integrity support
☑️ Supports compatible BitLocker and credential-protection configurations
☑️ Individually cleaned, retested, and screened for CVE-2017-15361
☑️ Useful replacement for damaged, missing, or affected workstation TPM modules

⚙️ Fit Notes

• Confirm that the motherboard requires the TPM-L R2.0 20-1-pin LPC module.
• A matching pin count does not confirm the pinout, TPM version, BIOS support, or electrical compatibility.
• Update the motherboard to the required BIOS version before installing the module.
• This module cannot upgrade a motherboard whose BIOS supports only TPM 1.0 or TPM 1.2.
• Do not install it in a 14-1-pin TPM-M R2.0 or TPM-SPI connector.
• Power off and unplug the system before installation. Align the blocked position and Pin 1 correctly; never force the module.
• TPM or Security Device Support may need to be enabled in the motherboard BIOS.
• After installation, use Windows tpm.msc or Windows Security to confirm that TPM 2.0 is detected.
• Back up BitLocker recovery keys and decrypt protected data before clearing, replacing, or updating a TPM. Clearing a TPM destroys stored keys.
• Windows 11 Notice: Installing TPM 2.0 does not guarantee Windows 11 eligibility. The processor, UEFI Secure Boot configuration, memory, storage, graphics, and other requirements must also be supported.
• The CVE screening applies specifically to CVE-2017-15361 and is not a guarantee against unrelated or future security issues.