16GB Industrial CFast SATA Solid State Drive SSD Flash Memory Card for Embedded Systems

This 16GB industrial CFast card provides removable solid-state storage for compatible embedded systems, industrial computers and equipment with a CFast SATA card slot.
The compact card format can be used for operating-system images, application files, equipment configuration data or other storage needs, depending on the host system. Its flash-based design contains no mechanical moving parts.
Please confirm that your equipment supports a 16GB CFast SATA card before ordering. CFast and traditional CompactFlash cards have different connectors and interfaces.

Product Photo and Fulfillment Notice

The product photo is for reference only and may not show the exact card shipped. The card’s label, color, appearance, manufacturer and part number may vary.
Orders will be fulfilled with a 16GB CFast SATA card that meets the specifications described in this listing. If your application requires a specific part number, flash type, temperature rating or other exact specification, please contact us before ordering.

Technical Specifications

• Brand: Unbranded
• Product Type: Industrial CFast flash memory card / solid-state storage
• Capacity: 16GB
• Form Factor: CFast
• Interface: SATA through a CFast connector
• Connector: 24-contact CFast interface — 7 signal contacts plus 17 power contacts
• Storage Technology: Nonvolatile flash memory
• Approximate Card Dimensions: 42.8 × 36.4 × 3.6mm
• Moving Parts: None
• Application: Compatible CFast-equipped embedded and industrial systems
• NAND Type, SATA Generation, Speed and Temperature Rating: Verify for the specific card supplied

Actual usable capacity may be lower than 16GB because of formatting, file-system overhead and the difference between decimal and binary capacity measurements.

Interchangeable / Replacement Part Number References

The following numbers identify 16GB CFast cards that may be useful when searching for a replacement. They represent different product families and specifications.

Related 16GB CFast references:

AF16GCSI-RABXP, AF16GCSI-OAAXP, AF16GCSI-XACXP, AF16GCS-XAEIP, BE16TLJF5-3N000-D, BA16LCDTK-XN000-D, BA16LCDV8-WP000-D, BB16TFPTK-XN000-D, BB16TFPV8-WP000-D, BE16TFPTQ-XN000-D, BE16TFPV9-WP000-D, CFAST-16G-XIE82, TS16GCFX722I, HFD10S-016GC, XFD10S-016GC, 5CFAST.016G-00, DHCFA-16GM41BC1DC, DECFA-16GD09BC1DC, DECFA-16GD08SCAQB, DECFA-16GM41SWADB, SFCA016GH1AO1TO-I-QC-216-STD, FSSF016GME-M100, FSSF016GMS-M100, FSSF016GPE-M100, FSSF016GPS-M100, FSSF016GSE-M100, FSSF016GSS-M100, 96FMCFF-16G-CS-AP1, APCFA016GGDAD-5ET, 96FMCFF-16G-CM-AP2, APCFA016GGDAN-3ETM1, KC16GF-295S, KC16GFI-295S, KC16GFI-240S, CFAST-A-16G-SI

Additional 16GB configuration references:

SRCFA016G-JICTC, WRCFA016G-JIITI, SPCFA016G-JFCTC, WPCFA016G-JFITI

Important: These are capacity and form-factor cross-references, not guaranteed exact equivalents. Cards may differ in SATA generation, flash type, endurance, operating temperature, firmware, write protection, power-loss protection, reported capacity and device identification.

If your equipment requires a specific part number or has a qualified parts list, compare those requirements before selecting a substitute. The numbers above do not imply that the card supplied will carry any particular manufacturer’s label or part number.

✅ Confirmed Compatibility

✔️ CFast SATA Slots: Systems designed to accept a 16GB CFast card and support the card’s SATA interface and operating requirements.
✔️ Industrial Computers: Compatible industrial PCs and panel PCs using a 16GB CFast card for a boot image, application or data.
✔️ Embedded Systems: Compatible embedded controllers and appliances with a CFast slot and support for 16GB storage.
✔️ Automation Equipment: Compatible control systems and operator interfaces that accept a suitable 16GB CFast SATA card.
✔️ Other CFast Applications: Compatible kiosks, point-of-sale systems, networking appliances and equipment using removable CFast storage.

Compatibility must be confirmed with the equipment manufacturer’s specifications. A compatible slot alone does not guarantee that a device will accept a particular card, boot image or firmware configuration.

Industrial PC and Controller Reference

The part-number references above include cards used with industrial PC and panel PC families such as Automation PC 910, 2200 and 3100 and selected Panel PC systems.

These are application references for researching the host’s approved storage requirements. If your equipment specifies a qualified card such as 5CFAST.016G-00, confirm whether an unbranded substitute is accepted before ordering.

⚠️ CFast vs. CompactFlash

CFast is not the same as traditional CompactFlash.

• CFast: Uses a SATA interface with a 24-contact connector.
• Traditional CompactFlash: Uses a 50-pin connector and a different interface.
• CFexpress: A separate card format that is not interchangeable with CFast.

The cards may look similar from the outside. Check the slot type and connector, not just the card’s shape or capacity.

☑️ Key Features

☑️ 16GB storage capacity
☑️ Compact CFast form factor
☑️ SATA-based removable flash storage
☑️ Solid-state design with no mechanical moving parts
☑️ Suitable for compatible industrial and embedded applications
☑️ Can be used for boot or data storage when supported by the host
☑️ Compact card for space-conscious systems
☑️ Part-number references provided to assist with replacement research

Common Applications

• Industrial PCs and operator panels
• Automation and process-control equipment
• Embedded computers and appliances
• Compatible CNC and machine-control systems
• Networking and communications equipment
• Kiosks and point-of-sale terminals
• Equipment used for data collection or local logging
• Systems requiring a supported 16GB CFast boot or data card

Applications vary by system. Confirm the equipment’s approved card type, required capacity and operating environment.

⚙️ Fit and Installation Notes

• Confirm that the host has a CFast SATA slot, not a traditional CompactFlash or CFexpress slot.
• Verify that your equipment supports 16GB. Some older systems accept only specific capacities.
• Compare the existing card’s capacity, connector and complete part number.
• Check whether your equipment requires a particular SATA generation, flash type, firmware or manufacturer-qualified card.
• Do not assume that every industrial card is rated for the same operating temperature or write endurance.
• A replacement card may be blank. Operating system, software, licenses and machine configuration are not included unless specifically stated.
• If replacing a boot or machine-control card, the original image may need to be cloned or restored using the equipment manufacturer’s procedure.
• Some systems check the storage device’s identification, capacity or licensing information. A cloned image alone may not guarantee operation.
• Power down the equipment before removing or installing the card unless its manufacturer specifically supports another procedure.
• Contact CPU Medics with your equipment model and the complete number from your existing card if you need help checking the fit.