FSE024-240G2 - 250W 10-Pin Bronze Power Supply for PowerEdge R230 R240

250W 80 PLUS Bronze internal power supply for compatible PowerEdge R230 and R240 1U servers requiring the exact 10-pin cabled PSU configuration. This non-redundant power supply includes permanently attached 8-pin, 4-pin, 10-pin micro, and secondary 8-pin connectors. FSE024-240G2, AC250E-S0, and 9J6JG appear together on this power-supply family and identify the same 250W unit.

Technical Specifications

• Primary Part Number: FSE024-240G2
• Manufacturer Model: AC250E-S0
• System Part Number: 9J6JG
• Reference Revision: A00
• Part Type: Internal server power supply
• Maximum Output Power: 250W
• Efficiency Rating: 80 PLUS Bronze
• Power Supply Configuration: Single non-redundant cabled PSU
• Form Factor: Proprietary 1U server power supply
• Dimensions: Approx. 231mm x 103mm x 40mm
• Dimensions in Inches: Approx. 9.09" x 4.06" x 1.57"
• AC Input Voltage: 100-240V AC autoranging
• AC Input Current: 4.0A-2.0A
• Input Frequency: 50/60Hz
• Main DC Output: +12.2V at 20.49A
• Standby Output: +12VSB at 3.0A
• Maximum Combined Output: 250W
• Maximum Heat Dissipation: 1039 BTU/hr
• Primary 8-Pin Connector: 1x 8-pin connector with approx. 18" cable
• 4-Pin Connector: 1x 4-pin connector with approx. 26.5" cable
• 10-Pin Micro Connector: 1x 10-pin micro connector with approx. 2.5" cable
• Secondary 8-Pin Connector: 1x 8-pin connector with approx. 18.5" cable
• Cable Design: Non-modular with permanently attached cables
• Hot-Plug Support: No
• Built-In Diagnostics: PSU self-test button and status indicator
• AC Power Inlet: IEC 60320 C14
• Required AC Cable: IEC C13 power cord
• Cooling: Integrated internal fan
• Installation Type: Internal screw-mounted server power supply

Interchangeable / Replacement Part Numbers

FSE024-240G2, AC250E-S0, 9J6JG

These three identifiers refer to the same 250W Bronze power-supply family with the short 10-pin micro connector and matching fixed cable layout.

⭐ Recommended Accessory - C13 AC Power Cord

This power supply uses a standard IEC C14 AC inlet. Add the cable below if the original power cord is missing, damaged, or not included.

⭐ 5120P - 6FT 125V NEMA 5-15P to IEC C13 Power Cord - Grounded North American AC power cable for connecting the power supply to a standard wall outlet. Sold separately.

✅ Confirmed Compatibility

Please note that compatibility depends on the server’s exact power-supply configuration. Verify the original part number, 250W rating, short 10-pin micro connector, complete fixed cable layout, dimensions, and mounting points before installation.

✔️ PowerEdge R230 Servers: Configurations originally equipped with the FSE024-240G2, AC250E-S0, or 9J6JG 250W Bronze cabled power supply and matching 10-pin connector layout
✔️ PowerEdge R240 Servers: Configurations requiring the same 250W Bronze cabled power supply, short 10-pin micro connector, enclosure dimensions, mounting points, and complete attached harness

☑️ Key Features

☑️ 250W maximum output for compatible PowerEdge R230 and R240 servers
☑️ 80 PLUS Bronze efficiency certification
☑️ Compact 40mm-high enclosure designed for compatible 1U server chassis
☑️ Short 10-pin micro connector distinguishes this exact cable configuration
☑️ Permanently attached 8-pin, 4-pin, 10-pin micro, and secondary 8-pin connectors
☑️ Autoranging 100-240V AC input
☑️ Integrated cooling fan
☑️ Built-in PSU self-test button and status indicator
☑️ Direct-fit replacement when the original part number and complete cable layout match

⚙️ Fit Notes

✓ Match the original part number whenever possible. Use this PSU only when the original unit is FSE024-240G2, AC250E-S0, or 9J6JG, or when the entire connector layout has been verified as identical.
✓ Confirm the presence of the short 10-pin micro connector and verify all four attached connectors and cable lengths before ordering.
✓ This is a proprietary non-redundant cabled 1U power supply. It is not a standard ATX PSU or removable hot-plug power module.
✓ Do not order based only on the 250W rating or server model. The enclosure, mounting points, connector types, wiring, and cable lengths must match.
✓ Do not use adapters or modify the attached wiring to install this power supply in a different connector configuration.
✓ This PSU is not hot-swappable. Shut down the server, disconnect the AC power, and allow the system to discharge before replacement.
✓ The AC power cord is not included unless shown. A compatible IEC C13 power cord is available separately above.