BS5005HS-U4Q 17M1-CPU 17M1-G-CW-4P - CPU and GPU Cooling Fan Kit for Creator 17 GS76 WS76 MS-17M1

This internal cooling fan kit includes the CPU and GPU fan assemblies required for select Creator 17, GS76, and WS76 systems built on the MS-17M1 chassis. The complete set contains two physical fan housings with three centrifugal blower motors and three 4-pin connections.

What’s Included

• Package Contents: One complete CPU and GPU cooling fan set
• CPU Fan Assembly: One single-blower fan assembly
• GPU Fan Assembly: One dual-blower fan assembly
• Total Blower Motors: Three
• Not Included: Heatsink, heat pipes, thermal compound, thermal pads, or mounting screws

Technical Specifications

• Brand: Unbranded
• Fan Type: Third Party - OEM equivalent
• Product Type: Internal CPU and GPU cooling fan kit
• Fan Design: Centrifugal blower
• Number of Fan Assemblies: Two
• Total Number of Blowers: Three
• Operating Voltage: DC 5V
• Connector Type: 4-wire 4-pin connector for each blower motor
• Total Connectors: Three
• CPU Fan Rated Current: Up to 1.0A - typically 0.5A
• CPU Fan Power: Up to 5W
• CPU Fan Speed: Approximately 4850 RPM
• CPU Fan Dimensions: Approximately 70mm × 70mm × 6.25mm
• GPU Fan Motor Current: Up to 1.0A and 0.5A
• GPU Fan Motor Power: Up to 5W and 2.5W
• GPU Fan Speeds: Approximately 4850 RPM and 4700 RPM
• GPU Fan Assembly Dimensions: Approximately 130mm × 70mm × 6.25mm
• Housing Color: Black
• Cooling Location: CPU and dedicated graphics processor
• System Platform: MS-17M1

Interchangeable / Replacement Part Numbers

BS5005HS-U4Q, BS5005HS-U4, BS5005HS-U3J, 17M1-CPU, 17M1-CPU-4P, 17M1-G-CW, 17M1-G-CW-4P, 17M1-G-CCW, E33-0801020-AE0, E330801020AE0, E33-0401960-AE0, E330401960AE0, 0801020, 0401960

Motor-level markings may vary between production revisions. Always match the complete fan housing, mounting points, cable routing, connector position, and MS-17M1 chassis reference.

⭐ Recommended Thermal Grease

Fresh thermal compound is recommended if the heatsink is removed during installation. Completely remove the old compound from the CPU, graphics processor, and heatsink contact surfaces before applying new thermal grease.

G751 High-Performance Thermal Grease for CPU and GPU Installation

✅ Confirmed Compatibility

Compatibility depends on the system’s exact chassis and internal cooling configuration. Confirm the MS-17M1 chassis code and compare the original fan housings, mounting tabs, cable routing, and 4-pin connectors before ordering.

✔️ Creator 17: B11UE, B11UG, B11UH
✔️ GS76 Stealth: 11UE, 11UG, 11UH
✔️ WS76: 11UK, 11UM
✔️ System Chassis: MS-17M1

☑️ Key Features

☑️ Complete CPU and GPU cooling fan replacement kit
☑️ Includes both required fan assemblies
☑️ Three centrifugal blower motors in total
☑️ Dedicated cooling for the CPU and graphics processor
☑️ DC 5V brushless fan design
☑️ Three separate 4-wire 4-pin connections
☑️ Supports automatic fan-speed monitoring and control
☑️ Pre-shaped housings with system-specific mounting tabs
☑️ Designed for the MS-17M1 internal cooling layout
☑️ Helps correct overheating, weak airflow, excessive fan noise, grinding sounds, and failed-fan errors

⚙️ Fit Notes

✓ Confirm that the system chassis is MS-17M1 before ordering. The marketing model name alone is not sufficient to establish compatibility.
✓ Match the original 17M1-CPU-4P and 17M1-G-CW-4P assembly references whenever available.
✓ The BS5005HS-U4Q marking identifies a blower-motor family and may appear in multiple fan assemblies. That motor marking alone does not guarantee that the housing will fit.
✓ The earlier BS5005HS-U3I, BS5005HS-U3J, 17G1-CPU, and 17G1-G-CW assemblies are commonly associated with GS75, P75, and WS75 systems using MS-17G1 or MS-17G2 chassis. Those housings are not direct-fit replacements for this MS-17M1 fan kit.
✓ Individual blower labels may show 0.5A or 1.0A depending on the fan position and production revision.
✓ Label design, date code, molded markings, wire colors, and minor housing details may vary. The mounting layout and connector configuration must match.
✓ E32-2500951-A87 identifies a related complete heatsink-and-fan assembly. That complete thermal assembly is not included with this fan-only kit.
✓ Disconnect the AC adapter and internal battery before removing or installing the fans.
✓ Clean accumulated dust from the exhaust fins and air channels during installation.
✓ If the heatsink is removed, replace the thermal compound before reassembly.