14VG6 12V 1.82A System Cooling Fan for PowerEdge R320 R620 R630
High-performance system cooling fan assembly for compatible PowerEdge 1U rack servers and storage appliances. This compact dual-rotor fan uses a 6-pin connector with system-controlled speed monitoring to maintain airflow across processors, memory, storage controllers, and other internal components.
Technical Specifications
- Primary Part Number: 14VG6
- Part Type: Internal system cooling fan assembly
- Fan Model: GFC0412DS
- Fan Design: Dual-rotor counter-rotating axial fan
- Motor Type: Brushless DC
- Rated Voltage: 12V DC
- Label Current: 1.82A
- Fan Frame Size: 40mm x 40mm x 56mm
- Complete Assembly Dimensions: Approximately 61mm x 40mm x 40mm
- Connector: Proprietary 6-pin server fan connector
- Bearing System: Dual ball bearing
- Speed Control: System-managed PWM variable-speed control
- Monitoring: Fan-speed / tachometer feedback
- Installation Type: Internal fan-bank module
- Hot-Swap Capability: Supported in compatible R620 and R630 systems; not supported in the R320
- Primary Application: Processor, memory, storage-controller, and chassis airflow
- Included: One complete cooling fan assembly
Interchangeable / Replacement Part Numbers
014VG6, 14VG6, 14VG6-A00, 14VG6-A01, 14VG6-A02, CN-014VG6, 0F1YN7, F1YN7, CN-0F1YN7, GFC0412DS, GFC0412DS-R620, 01RK1R, 1RK1R, 021WNT, 21WNT, 02X0NG, 2X0NG, 0VGMHR, VGMHR, VGMHR-A00, 9CRN0412P5, PG40561BX-Q000-S99, PSD1204PPBX-A
Compatible fan-vendor versions may display different manufacturer model numbers and amperage markings while retaining the required housing, connector, airflow capability, and system communication.
✅ Confirmed Compatibility
Please note that compatibility depends on the server’s exact chassis, cooling configuration, fan performance class, connector, and original part number. Compare the existing fan assembly before ordering.
✔️ PowerEdge R320: 4 x 3.5-inch cabled-drive chassis, 4 x 3.5-inch hot-plug-drive chassis, and 8 x 2.5-inch hot-plug-drive chassis
✔️ PowerEdge R320 Fan Configurations: Four cooling fans with a non-redundant power supply or five cooling fans with redundant power supplies
✔️ PowerEdge R620: 8 x 2.5-inch and 10 x 2.5-inch chassis configurations using seven internal cooling fans
✔️ PowerEdge R630: Compatible configurations using the matching standard-performance 6-pin fan module, including systems accepting F1YN7 or 14VG6 as a replacement fan
✔️ PowerVault NX400: R320-based 1U storage-system configurations using the matching fan assembly
✔️ PowerVault NX3300: R620-based 1U storage-system configurations using seven internal cooling fans
✔️ PowerVault DL4000: R620-based 1U backup-appliance configurations using the matching fan module
✔️ OEM Ready Platforms: OEMR R320, OEMR R620, and OEMR XL R620 systems with the corresponding 6-pin cooling-fan configuration
☑️ Key Features
☑️ Direct replacement for compatible 14VG6 and F1YN7 cooling assemblies
☑️ Compact 40mm dual-rotor design for high-density 1U servers
☑️ Counter-rotating impellers provide strong airflow and static pressure
☑️ 12V DC operation with a 1.82A label rating on GFC0412DS versions
☑️ Proprietary 6-pin connector for power, speed control, and monitoring
☑️ PWM control allows the system to adjust fan speed according to temperature and hardware configuration
☑️ Tachometer feedback allows system management software to detect fan operation and faults
☑️ Hot-swappable in compatible R620 and R630 systems
☑️ Useful replacement for failed, stalled, intermittent, excessively noisy, or error-reporting fans
☑️ Complete fan assembly installs into the existing server fan bank
⚙️ Fit Notes
✓ Match the original fan part number, 6-pin connector, housing shape, mounting tabs, and airflow orientation before ordering.
✓ The
1.82A rating applies to the GFC0412DS / 14VG6 version. Other system-approved replacement versions may display different amperage and manufacturer model numbers.
✓ R630 systems were produced with several fan models and performance levels. Compare the original fan carefully, particularly in 10-bay, 24-bay, or higher-performance configurations.
✓ Cooling fans are hot-swappable in the R620 and R630. Replace only one fan at a time and do not operate the system with its cover removed for more than five minutes.
✓ R320 and NX400 cooling fans are
not hot-swappable. Shut down the system and disconnect power before replacement.
✓ Do not substitute a generic 40mm fan. The connector pinout, system communication, housing, airflow performance, and mounting arrangement must match.
✓ Fan speed may increase temporarily during startup or when the system detects elevated temperatures, unsupported expansion hardware, missing covers, or altered cooling components.
✓ Reinstall all required fans, cooling shrouds, covers, and blanks before returning the system to normal operation.
