22-Inch RAID Battery Cable for PowerEdge PERC 5/i PERC 6/i NU209 FR463

This 22-inch internal cable connects a compatible PERC RAID controller to its remote cache backup battery. It is designed for supported PowerEdge server configurations using an NP393 cable with PERC 5/i or PERC 6/i controllers.

Technical Specifications

Part Number: NP393
Alternate Part Number: 0NP393
Common Label Prefix: CN-0NP393
Product Type: Internal RAID Cache Battery Cable
Cable Length: 22 Inches
Connector Style: 5-Pin RAID Battery Connector
Compatible Controllers: PERC 5/i and PERC 6/i
Installation Location: Inside Server Chassis
Package Includes: One RAID Battery Cable
Battery Included: No

Interchangeable / Replacement Part Numbers

NP393, 0NP393, CN-0NP393

★ Cross Reference / Cross-Sell

Need the matching RAID cache battery? See the NU209 3.7V 7Wh Li-Ion RAID Cache Battery Backup for PERC Controllers.

Battery is sold separately.

✅ Confirmed Compatibility

Compatibility depends on the installed RAID controller, battery, cable length, connector, and chassis configuration. Verify NP393 or 0NP393 on your original cable before ordering.

✔️ PowerEdge R-Series: R410 configurations using the NP393 battery cable
✔️ PowerEdge T-Series: T300 configurations using the NP393 battery cable
✔️ RAID Controllers: PERC 5/i and PERC 6/i controllers configured with a remote RAID cache battery
✔️ Primary Battery Part Numbers: NU209, FR463
✔️ Additional Compatible Battery Part Numbers: FR345, P9110, U8735, XJ547, UF302, 312-0448, 0NU209, 0P9110, 0U8735, 0XJ547, 0UF302

☑️ Key Features

☑️ 22-inch internal cable for compatible server chassis routing
☑️ Connects the RAID controller to its remote cache backup battery
☑️ Supports compatible PERC 5/i and PERC 6/i configurations
☑️ Five-pin RAID battery connection
☑️ Replaces a missing, damaged, pinched, or intermittent battery cable
☑️ Compatible with NU209 and FR463-style RAID cache batteries
☑️ Cable only for direct replacement and server repair

⚙️ Fit Notes

• Confirm that the original cable is marked NP393 or 0NP393 and measures approximately 22 inches.
• Do not order by the battery part number alone. NU209 and FR463 batteries are used with several different cable lengths depending on the server chassis.
• R410 and T300 systems may have been configured with different RAID controllers. Verify the installed controller and physical connector before ordering.
• The linked battery may support additional controllers, including PERC H700. This NP393 cable is confirmed here only for compatible PERC 5/i and PERC 6/i configurations.
• This listing includes the cable only. The RAID controller, cache battery, server, and mounting hardware are not included.
• Shut down the server, disconnect AC power, and follow proper electrostatic-discharge precautions before installation.
• Route the cable through the original chassis path and keep it clear of fans, heatsinks, sharp metal edges, and removable components.
• A battery warning can also be caused by a failed battery, controller fault, outdated firmware, or damaged connector. Replacing the cable may not resolve every battery-related error.