1300W Genuine OEM Power Supply for Precision T7910

1300W internal power supply for compatible Precision T7910 Tower workstations using the matching -02 housing, alignment groove, and proprietary power-distribution connection. This rear-removable PSU provides high-capacity power for demanding dual-processor, professional graphics, engineering, rendering, simulation, and workstation applications.

Technical Specifications

• Primary Part Number: D1300EF-02
• Part Type: Internal workstation power supply
• Product Type: Genuine OEM
• Form Factor: Proprietary rear-removable power-supply module
• Maximum Output Power: 1300W
• Output at 100–107V AC: Up to 1000W
• Output at 108–180V AC: Up to 1100W
• Output at 181–240V AC: Up to 1300W
• AC Input Voltage: 100–240V AC
• Maximum Input Current: 14A
• Input Frequency: 50/60Hz
• Efficiency Rating: 80 PLUS Gold
• System-Side Connection: Proprietary hot-plug-style blind-mate connector
• System Connector Width: Approximately 83.40mm
• AC Equipment Inlet: IEC 60320 C14
• Compatible Power-Cord Connector: IEC 60320 C13
• Cooling: Integrated forced-air fan cooling
• Dimensions: Approximately 160mm x 68mm x 224mm
• Approximate Dimensions in Inches: 6.30" x 2.68" x 8.82"
• Alignment Tab Inner Width: Approximately 8.6mm
• Alignment Tab Outer Position: Approximately 25.8mm from the end of the frame
• Installation Type: Rear-access slide-in module
• Power Cord Included: No unless specifically shown

Interchangeable / Replacement Part Numbers

D1300EF-02, D1300EF02, H1300EF-02, H1300EF02, DPS-1300HB A, DPS-1300HB-1 A, DPS-1300HB-A, DPS-1300HB-1A, D1K3E003L, 0T6R7, 00T6R7, CN-00T6R7, V5K16, 0V5K16, CN-0V5K16, T31JM, 0T31JM, CN-0T31JM

➕ Recommended C13 Power Cord

➕ 5120P 6FT 125V NEMA 5-15P to IEC C13 Power Cord — Grounded North American AC power cord for connecting the power supply’s IEC C14 inlet to a standard 125V wall outlet. Sold separately.

Important AC Input Note

The complete 1300W output rating is available only with 181–240V AC input. When operated from a standard North American 120V or 125V outlet, the maximum available output is 1100W.

The recommended 5120P C13 power cord is rated for 125V North American operation. It must not be used for 208V or 240V installations. Full 1300W operation requires a properly rated 250V power cord, receptacle, and electrical circuit suitable for the installation.

✅ Confirmed Compatibility

Compatibility depends on the complete power-supply number, -02 suffix, housing groove, system-side connector, power-distribution board, and chassis configuration.

✔️ Precision Tower 7910 / T7910 Workstation: Direct-fit replacement for matching factory 1300W configurations
✔️ Regulatory Model D02X: Confirmed tower platform
✔️ Regulatory Type D02X003: Confirmed T7910 regulatory configuration
✔️ Single- and Dual-Processor Configurations: Compatible when the workstation retains the correct power-distribution board and -02 power-supply interface
✔️ Professional Graphics Configurations: Supports compatible high-power graphics configurations within the workstation’s documented GPU, cable, slot, and total power limits

☑️ Key Features

☑️ Genuine OEM 1300W workstation power supply
☑️ Direct-fit rear-removable design for compatible Precision T7910 systems
☑️ Supports up to 1300W output with 181–240V AC input
☑️ Supports up to 1100W output with standard 120V or 125V North American input
☑️ 80 PLUS Gold efficiency rating
☑️ Proprietary blind-mate connection to the system power-distribution board
☑️ Integrated forced-air cooling for demanding workstation workloads
☑️ Suitable for dual-processor, professional graphics, CAD, rendering, engineering, simulation, and data-processing configurations
☑️ Useful replacement for a failed, noisy, overheating, intermittent, or nonfunctional power supply

⚙️ Fit Notes

• Match the complete D1300EF-02 number and -02 suffix whenever possible
• Confirm the original PSU uses the same top alignment groove, housing tabs, dimensions, and 83.40mm system-side connector
• D1300EF-01 is not interchangeable because the upper housing groove is positioned differently
• This is a proprietary workstation power module and is not a standard ATX power supply
• The PSU connects to the workstation’s power-distribution board rather than directly to the motherboard with conventional ATX cables
• Confirm that the original power-distribution board and all required CPU, graphics, storage, and motherboard power cables remain installed
• The maximum available wattage depends on the supplied AC input voltage
• The 5120P C13 power cord is intended only for 125V North American operation
• This listing is for the power-supply module only; the power-distribution board, internal power cables, and AC power cord are not included unless specifically shown
• Do not confuse the Precision Tower 7910 with the separately designed Precision Rack 7910
• Shut down the workstation, disconnect the AC power cord, and allow the system to discharge before removing or installing the PSU