ER6VC119A ER6V 3.6V 2400mAh PLC Battery Black Connector for Mitsubishi M70

ER6V 3.6V 2400mAh lithium PLC / CNC backup battery for Mitsubishi M70 control systems using the black 2-pin connector battery style. This non-rechargeable battery assembly is used to help retain control memory, parameters, and configuration data when the machine is powered off or disconnected from main power.

Technical Specifications

• Primary Part Number: ER6VC119A - Black
• Battery Model: ER6V
• Part Type: PLC / CNC memory backup battery
• Battery Chemistry: Lithium
• Voltage: 3.6V
• Capacity: 2400mAh
• Rechargeable: No
• Connector Type: Black 2-pin connector
• Lead Wires: Red / black wire lead assembly
• Cell Style: Cylindrical lithium battery cell with attached wire harness
• Application Type: CNC control / PLC memory backup battery
• Common Use: Retaining parameters, memory, settings, and configuration data
• Condition: New
• Installation Type: Internal control battery replacement

Interchangeable / Replacement Part Numbers

ER6VC119A - Black, ER6V/3.6V - Black, ER6VC119B - Black

Brown Connector Version

This ER6V battery comes in two connector versions: black connector and brown connector. This listing is for the black connector model only.

If your original battery uses the brown connector, use the correct brown connector version here:

ER6V/3.6V - ER6V 3.6V 2400mAh PLC Battery Brown Connector Model

✅ Confirmed Compatibility

Please note that the following list is not exhaustive. Compatibility depends on your machine’s specific configuration, original battery part number, connector color, connector keying, wire lead orientation, and control battery socket. It’s essential to verify compatibility with your original battery before installation.

✔ Mitsubishi M70 CNC Controls: Compatible with Mitsubishi M70 systems using the ER6V 3.6V 2400mAh black 2-pin connector battery.
✔ Mitsubishi CNC / PLC Battery Applications: Compatible with control systems that specifically require an ER6V 3.6V 2400mAh battery pack with the matching black 2-pin connector.
✔ Industrial Control Equipment: Used in compatible CNC machines, PLC controls, robotics systems, automation equipment, machining centers, turning centers, mills, and lathes that require this ER6V black connector backup battery style.

☑️ Key Features

☑️ ER6V 3.6V lithium backup battery for compatible CNC / PLC controls
☑️ 2400mAh capacity for long-lasting memory backup support
☑️ Black 2-pin connector model for matching Mitsubishi M70 configurations
☑️ Helps retain machine parameters, control memory, and configuration data
☑️ Pre-wired battery assembly with red / black lead wires
☑️ Non-rechargeable lithium battery design
☑️ Useful replacement for low-battery warnings, weak backup batteries, or scheduled maintenance
☑️ Direct-fit replacement when the original part number, connector color, and wire orientation match
☑️ Suitable for industrial control cabinets and automation environments

⚙️ Fit Notes

• Match your original battery part number whenever possible.
• This listing is for the black connector model only.
• The brown connector and black connector versions are not automatically interchangeable.
• Confirm connector color, connector shape, pin count, wire polarity, and lead orientation before ordering.
• This is a non-rechargeable lithium battery. Do not attempt to recharge it.
• Back up machine parameters before replacing the battery whenever possible.
• Follow the machine manufacturer’s battery replacement procedure to help prevent memory or parameter loss.
• Observe correct polarity during installation. Red and black leads must match the original battery orientation.
• Replace only with the same battery voltage, chemistry, connector style, and compatible part number.
• Do not cut, splice, or modify the connector unless performed by a qualified technician.
• Dispose of lithium batteries properly according to local regulations.