This 230W internal ATX power supply is designed for select OptiPlex and Dimension desktop computers. It includes a standard 24-pin ATX motherboard connector, 4-pin processor power connector, two SATA connectors, two IDE/Molex connectors, and one floppy-drive power connector for supporting both SATA and legacy internal drives.
• Maximum Power: 230W
• Power Supply Type: Internal ATX Power Supply
• Form Factor: Compact ATX
• AC Input Voltage: 100–120V / 200–240V AC
• Input Frequency: 50/60Hz
• AC Power Receptacle: IEC C14
• Motherboard Connector: (1) 24-Pin ATX Connector
• Processor Power Connector: (1) +12V 4-Pin Connector
• SATA Power Connectors: (2)
• IDE/Molex Power Connectors: (2)
• Floppy-Drive Connector: (1) FDD Power Connector
• Cooling Type: Integrated Cooling Fan
• Required AC Power Cord: NEMA 5-15P to IEC C13
H2309P-00, H230N-00, H230P-00, HP-P2307F3P, HP-P2307F3PLF, L230N-00, L230P-00, MC633, N230N-00, N230P-00, N8372, NC905, NPS-230DB A, NPS-230DB-1 A, P8407, PC357, PS-5231-2DFS, PS-5231-2DFS-LF, PS-5231-2DS-LF, PS-531-2DFS-LF, R8042
This power supply requires a standard NEMA 5-15P to IEC C13 AC power cord. The AC power cord is not included and is available separately:
5120P / 05120P – 6FT 125V 5-15P to C13 AC Power Cord
Please note that compatibility depends on the system’s chassis, original power-supply part number, dimensions, mounting points, and connector configuration. Verify these details before ordering.
✔️ OptiPlex 210L: Desktop and Mini Tower configurations originally equipped with a matching 230W power supply
✔️ OptiPlex 320: Compatible Desktop and Mini Tower configurations
✔️ OptiPlex 330: Compatible Desktop and Mini Tower configurations
✔️ OptiPlex 360: Compatible Desktop and Mini Tower configurations
✔️ OptiPlex GX520: Compatible Desktop and Mini Tower configurations
✔️ OptiPlex GX620: Compatible configurations using a matching 230W ATX power supply
✔️ Dimension: Dimension 3100, Dimension E310, Dimension 5100, Dimension 5150, Dimension E510
☑️ 230W maximum power output
☑️ Standard 24-pin ATX motherboard power connection
☑️ Dedicated 4-pin +12V processor power connection
☑️ Two SATA connectors for compatible hard drives and optical drives
☑️ Two IDE/Molex connectors for legacy drives and accessories
☑️ Dedicated floppy-drive power connector
☑️ Supports systems containing a combination of SATA and legacy IDE devices
☑️ Direct replacement for multiple interchangeable part numbers
• Verify the original power supply’s part number before ordering whenever possible.
• Confirm that the system uses a 24-pin ATX motherboard connector and a separate 4-pin +12V processor connector.
• Check the original unit’s dimensions, mounting pattern, rear AC receptacle position, and cable layout before installation.
• Systems within the same OptiPlex or Dimension family may use different power supplies depending on chassis size and factory configuration.
• This power supply is not intended for Small Form Factor systems that use a narrow proprietary power-supply chassis.
• The FDD, SATA, and IDE/Molex connector counts should be compared with the system’s existing drive requirements before ordering.
• This listing includes the power supply only. The C13 AC power cord and all other accessories are sold separately.
