HP D9161-63002 - NetRAID 4M daughter board backup battery replacement kit - Includes battery with attached cable and installation instructions Retail
HP A1703-60093 - Adapter bracket (U-shaped) - Attaches to bottom half of 5.25-inch drive drawer and allows the mounting of two additional 3.5-inch half-height hard drives Retail
HP D9387-63013 - I/O panel assembly - Mounts to the back of the chassis - Has cutouts for I/O connectors Retail
HP D9387-63008 - Nameplate - NetServer PIII E800 logo - Mounts on the upper edge of the front bezel Retail
HP J1469A - HP rack mount kit for NetServer E60, E200, and E800 - Includes pair of rails, plastic bezel trim, mounting hardware, and installation instructions Retail
HP D7140-63010 - Technical reference card - Includes: power cabling, service information, system board diagnostics and drive settings Retail
HP D7140-63014 - Terminator board - Used in secondary processor socket for a system with only one processor Retail
HP D7140-63018 - Tubeaxial fan - For cooling the processors and other components - Mounts on the inside rear of the chassis assembly Retail
HP D8214A - NetServer E60 external SCSI port cable - Includes one SCSI cable to enable an external SCSI port Retail
HP D7132-63000 - 16MB SIMM memory module for NetRaid 3Si disk array controller - See D7132-69000 Retail
HP D7140-63006 - Floppy drive ribbon cable - 34-pin (F) connector marked `to system board` to 34-pin (F) connector - 26.7cm (10.5in) long - From floppy drive to FDD connector on the system processor board Retail
HP D7140-63004 - Rubber foot - Replacement rubber foot for the bottom of the chassis (four used) Retail
HP D7140-63002 - Chassis assembly - Includes internal metal chassis and the exterior cover assembly (U-shaped) Retail
HP D7140-63011 - Airflow guide - Directs air to the processors for cooling - Mounts in front of the fan Retail
HP A1707-90016 - HP model 3000 series 9x7, and HP model 9000 series 8x7 and 800/X CE handbook - For HP repair use ONLY Retail
HP 5062-3308 - HP-FL CIO disk interface - CIO HP-FL Disk Interface (27111A or 27115A) - Requires PBA Retail
HP 5062-3303 - CIO HP-IB interface board - CIO HP-IB Interface Board (27113A) - Requires PBA Adapter Retail
HP 28655-69004 - Single-Ended SCSI-2/Centronics host adapter board - Single Ended SCSI-2/Centronics Host Adapter Board - for the HP-PB I/O Board Slot (P/O 28642A or 28655A) Retail
HP 28615-69004 - Fiberoptic peripheral interface board - Fiberoptic Peripheral Interface Board - for the HP-PB I/O Board Slot (P/O 28615A or 28616A) Retail
HP A1700-60005 - Precision bus adapter (l-shaped) - Adapts CIO board to backplane - Precision Bus Adapter(L-Shaped) - Adapts CIO Bd to Backplane Retail
HP 97560-69021 - Single-ended SCSI controller board - Firmware not included - Mounts on top of 677MB or 1.3GB Drive Retail
HP 97560-69162 - 1.3GB SCSI hard drive mechanism - 5.25in, full height - Controller PC board is NOT included Retail
HP C1534-60008 - Bracket (rail) kit - Includes left and right side brackets - Used to mount a DDS drive in a 5.25 inch drive slot Retail
HP A1751-69003 - Processor board for all configurations - Processor Board (for all Configurations) - Plugs into the Backplane Board - for HP Repair Use ONLY Retail
HP A1703-69204 - Multifunction I/O board - Includes SCSI/parallel port, plus console, modem, AUI, and ThinLAN connectors Retail
