4.8V Ni-MH 650mAh RAID Controller Battery for Smart Array P410 P411 P212

4.8V Ni-MH 650mAh RAID controller battery for compatible Smart Array P-Series controller configurations using battery-backed write cache. This replacement battery is compatible with Smart Array P410, P410i, P411, and P212 RAID controller setups and is interchangeable with 462976-001, 460499-001, and 462969-B21 part numbers.

Technical Specifications

• Primary Part Number: 462976-001
• Part Type: RAID controller battery
• Battery Type: Battery-backed write cache battery
• Battery Chemistry: Ni-MH
• Voltage: 4.8V
• Capacity: 650mAh
• Approximate Power Rating: 3Wh
• Compatible Controller Series: Smart Array P410, P410i, P411, P212
• Supported Cache Type: BBWC / battery-backed write cache configurations
• Related Cache Memory Module: 512MB cache memory module 462975-001
• Related RAID Controller Part Number: 462594-001
• Installation Type: Internal RAID controller battery connection
• Application Type: Server and storage RAID cache backup battery replacement

Interchangeable / Replacement Part Numbers

462976-001, 460499-001, 462969-B21

Compatible Related Components

• 512MB Cache Memory Module: 462975-001
• Compatible 24" Battery Cable: 448138-001
• Compatible 15" Battery Cable: 488137-001
• Related Smart Array RAID Controller: 462594-001
• Compatible Controller Families: Smart Array P410, P410i, P411, P212

✅ Confirmed Compatibility

Please note that the following list is not exhaustive. Compatibility depends on your system’s specific configuration. It’s essential to verify compatibility with your RAID controller model, cache module, battery cable, original battery part number, firmware support, and server chassis configuration prior to installation.

✔ Smart Array RAID Controllers: Smart Array P410 Controller, Smart Array P410i Controller, Smart Array P411 Controller, Smart Array P212 Controller
✔ ProLiant Rack / Tower Servers: HPE ProLiant ML110 G6, ML110 G7, ML150 G6, ML330 G6, ML350 G6, ML350p Gen8, ML370 G6, DL120 G5, DL120 G6, DL120 G7, DL160 G6, DL165 G6, DL165 G7, DL180 G6, DL180se G6, DL185 G5, DL320 G6, DL360 G6, DL360 G7, DL370 G6, DL380 G6, DL380 G7, DL385 G6, DL385 G7, DL388 G7, DL580 G7, DL585 G6, DL585 G7, DL785 G5, DL785 G6, DL980 G7, SE1120, SE1220, SL170s G6, SL390s G7
✔ ProLiant Blade / Workstation Blade Models: HPE ProLiant BL460c G6 Server Blade, BL460c G7 Server Blade, BL490c G7 Server Blade, BL620c G7 Server Blade, BL680c G7 Server Blade, WS460c G6 Workstation Blade
✔ Storage / Tape / Gateway Systems: HPE StoreEver LTO Ultrium Tape Blades, StoreEver Ultrium Tape Drives, StoreOnce Systems, P4000 G2 SAN Solutions, P4000 G2 Unified NAS Gateway Systems, StoreAll Gateway Storage, StoreAll Storage, StorageWorks X3000 Network Storage Systems, StoreEasy 3000 Gateway Storage, StoreEasy 3000 Gateway Storage Blade, StoreEasy 1000 Storage, X1000 Network Storage Systems, X1800sb G2 Network Storage Blade

☑️ Key Features

☑️ 4.8V 650mAh Ni-MH RAID controller battery replacement
☑️ Designed for compatible Smart Array P-Series BBWC configurations
☑️ Supports Smart Array P410, P410i, P411, and P212 controller setups
☑️ Compatible with 512MB cache memory module 462975-001
☑️ Works with compatible 24" battery cable 448138-001 or 15" battery cable 488137-001 depending on system configuration
☑️ Helps maintain RAID controller cache protection in supported server and storage systems
☑️ Interchangeable with 462976-001, 460499-001, and 462969-B21
☑️ Useful replacement for failed, weak, missing, or end-of-life RAID controller cache batteries

⚙️ Fit Notes

• Match your original RAID battery part number whenever possible
• Confirm your controller is a compatible Smart Array P410, P410i, P411, or P212 model
• Confirm your system uses a compatible BBWC / battery-backed write cache configuration
• This battery is not a replacement for FBWC capacitor packs, flash cache modules, CMOS batteries, or main system batteries
• Verify that your system has the correct cache memory module and battery cable before ordering
• Battery cable length and routing can vary by chassis; confirm whether your system uses the 448138-001 24" cable or 488137-001 15" cable
• Some installations may require the existing battery cable, holder, adhesive mount, or bracket to be reused
• RAID controller firmware and system configuration can affect battery detection and cache status
• After installation, allow the system/controller time to detect and charge the replacement battery
• Always power down the server, disconnect AC power, and follow proper ESD safety procedures before replacing internal RAID controller components
• Do not install in systems requiring a different voltage, chemistry, connector type, or controller-specific battery pack