HP 20-0F87A-01 - 1GB ECC RIMM, 800Mhz, 288Mb, 40ns (32 device) - Only Supported on 1000/1150 Mhz cpu`s Retail
HP 17-05101-01 - Harness assembly - 24AWG, 2-conductor cable - Connects from expander module to switch for CPU door Retail
HP 17-05021-05 - Cable assembly - Flat 80-conductor cable with two 40-position Ultra ATA IDE receptacle connectors - Connects from expander to IDE interface module Retail
HP 17-05081-01 - Cable - Flat, 26-conductor cable with IDC connectors on both ends - Connects from backplane to LED module Retail
HP 17-05036-01 - IO/IP cable - 2P, 2m (6.568ft) long, white/orange - Connects from 2P drawer to 2P drawer Retail
HP 17-05036-02 - IO/IP cable - 2P, 3.5m (11.48ft) long, white/gray - Connects from 2P drawer to IO drawer Retail
HP 17-05100-02 - Harness assembly - 24AWG, 14-conductor cable - Connects from PCI backplane to PCI hot swap module Retail
HP 17-05089-01 - Cable assembly - Round, shielded, 68-conductor cable with two (M) connectors - Connects from expander module to SCSI disk Retail
HP 17-05088-01 - Cable assembly - Round, shielded, 4-conductor cable - Connects from expander module to USB module Retail
HP 17-05082-02 - Cable assembly - Flat, 10-conductor cable with D-sub connectors - Connects from expander module to USB module and Ocp module Retail
HP 17-05079-02 - Harness assembly - 24-conductor for front fan - Connects from expander module to front switch IDE interface, SCSI disk, and interlock Retail
HP 17-05078-02 - Harness assembly - 16-conductor for rear fan - Connects from expander module to rear fan Retail
HP A3262-63006 - Fast Wide SCSI ribbon cable - Has three 68-pin (M) connectors - 59.4cm (23.4in) long - From the hot-swap drive bay backplane board to Fast Wide SCSI to HSC adapter board Retail
HP A3262-60036 - Front bezel assembly - Front panel with power switch cover and multimedia/hard disk drive door - For rack mounted configuration Retail
