HP E5932A - 16A power distribution unit (PDU) - Has ten C13 (F) power outlets - For 200-240V - Customer must supply plug for PDU power cable Retail
HP E5931A - 16A power distribution unit (PDU) - Has a L6-30P for power input and ten C13 (F) power outlets - For 100-240V Retail
HP E4457A - 16A power distribution unit (PDU) - Has ten C13 (F) power outlets - For 200-240V - Customer must supply plug for PDU power cable Retail
HP E4456A - 16A power distribution unit (PDU) - Has attached L6-20P (M) plug for power input and ten C13 (F) power outlets - For 220V Retail
HP 5064-2482 - `Daisy chain` power cord - 18 AWG, 2.0m (6.6ft) long - Has C14 (M) plug for power input and C13 (F) plug for power output - One required for each FC60 controller module Retail
HP 5065-5201 - 256MB DIMM memory module - For array controller module (1 or 2 used for each controller) (A5279A, A5658A) Retail
HP A5277-60003 - Hot-Swap controller fan module assembly - For the FC60 controller enclosure - Installs next to controller modules Retail
HP A5277-60002 - Hot-Swap power supply fan module assembly - for the FC60 controller enclosure - Installs between the power supplies Retail
HP 348-0038142 - FC60 controller enclosure assembly - Includes outer chassis, midplane PC board, 5V and 12V power cables, battery cable, and internal chassis assemblies to hold the controllers, the fans, the battery backup unit, and the power supplie Retail
HP A5635-69002 - Array controller module for Windows NT 4.0 and Windows 2000 - Ships with 32MB SIMM memory, but no DIMM memory Retail
HP 348-0038146 - Chassis for power supplies and power supply fan - Includes the PC Board with plugs for the power cables on one side and plugs for the power supplies and power supply fan on the other side Retail
HP C3595-80049 - Foam packaging - For power supply module or drive module - NOTE: you must also purchase the shipping box Retail
HP C2788A - Rail kit - Includes one pair of rails, four mounting screws, and four sheet metal nuts - Used to mount items in HP 19-inch EIA racks Retail
HP A6518-69001 - 36.4GB hot-swap SCSI hard drive module - 10,000 RPM, low profile - NOTE: This Drive Requires High Speed Fans - (A6518A) Retail
HP C3595-40009 - Power switch push rod - From front of chassis to power switch on backplane board Retail
HP C5445-60042 - Power supply lockout kit for one power supply - Includes one standoff and one screw - (One kit used for each power supply) Retail
HP 5064-2404 - AC power adapter kit - Includes a power receptacle and two T-15 screws with captive lock washers Retail
HP 1420-0532 - 2.4V battery pack - 2.8Ah, nickel cadmium (NiCd) battery pack with cable - Rechargeable Retail
HP A3639-63018 - `V` SCSI interface cable - 68-pin very high density (M) connector with inline termination on one end, 68-pin high density (M) connector in the middle, 68-pin high connector on the other end - Two 2.0m (6.6ft) sections - (A5610A) Retail
HP A3639-63017 - `V` SCSI interface cable - One 68-pin very high density (M) connector on one end, one 68-pin high density (M) connector in the middle, one 68-pin high density (M) on the other end - Two 2.0m (6.6ft) sections - (A5609A) Retail
HP A3639-63015 - `V` SCSI interface cable - One 68-pin very high density (M) connector on one end, one 68-pin very high density (M) connector in the middle, one 68-pin high density (M) on the other end - Two 2.0m (6.6ft) sections - (A5607A) Retail
HP 5064-2408 - SCSI cable - Right angle high density 68-pin (M) connectors on both ends - 27cm (10.8in) long Retail
