64GB 6G Internal SATADOM SSD

64GB 6G internal SATADOM solid state drive for compatible server and embedded system configurations using a motherboard-mounted SATA DOM boot device. This compact internal SSD is designed for compatible PowerEdge 13th generation servers, Supermicro SATA DOM / SuperDOM-ready motherboards, and systems that support a 64GB SATA 6Gb/s disk-on-module with the same connector style, power requirement, and physical clearance.

Technical Specifications

• Part Type: Internal SATADOM solid state drive
• Storage Capacity: 64GB
• Interface: SATA III / SATA 6Gb/s
• Form Factor: SATADOM / SATA disk-on-module
• Drive Type: Internal motherboard-mounted SSD
• Use Case: Boot drive, OS installation drive, recovery drive, license drive, embedded storage, or lightweight internal system storage
• Installation Type: Direct motherboard SATA connector installation
• Application Type: Server, workstation, embedded system, and industrial system storage replacement

Connector & Power Requirements

• Main Data Connector: 7-pin SATA connector
• Power Method: Power requirement depends on the host motherboard and exact SATADOM version
• Dell / Innodisk Style Modules: May require a compatible 4-pin / 2-wire SATADOM power cable depending on system configuration
• Supermicro X10 / Newer SATADOM Ports: Yellow SATADOM connector with built-in power pins; normally no separate power cable required
• Supermicro X9 SATADOM Ports: White SATA connector; requires compatible 5V SATADOM power cable
• Fit Requirement: Verify connector direction, cable requirement, board clearance, and nearby component spacing before ordering

Interchangeable / Replacement Part Numbers

6GMMX, 06GMMX, 0T4M4, 00T4M4, CMKK7, SSD-DM064-SMCMVN1, DSSML-64GM413CADCB, K9R5M, 0K9R5M, DKV8N, 0DKV8N, MGV75

✅ Confirmed Compatibility

Please note that the following list is not exhaustive. Compatibility depends on your system’s specific configuration. It’s essential to verify compatibility with your server model, original SATADOM part number, SATA DOM connector type, power cable requirement, BIOS / boot support, and physical clearance prior to installation.

✔ PowerEdge 13th Generation Rack Servers: PowerEdge R430, PowerEdge R630, PowerEdge R730, PowerEdge R730xd
✔ Additional PowerEdge 13th Generation Systems: PowerEdge R330, PowerEdge R830, PowerEdge R930, PowerEdge T330, PowerEdge T430, PowerEdge T630
✔ Supermicro SATA DOM / SuperDOM Compatible Boards: Compatible with Supermicro X10 generation and newer motherboards using the yellow powered SATADOM connector
✔ Supermicro X9 Generation Boards: Compatible with supported X9 generation motherboards when the required 5V SATADOM power cable is used
✔ Industrial / Embedded SATA DOM Systems: Compatible with industrial PCs, embedded systems, and rack servers that support a standard 64GB SATA 6Gb/s SATADOM module with the correct connector orientation and power source

☑️ Key Features

☑️ 64GB internal SATADOM SSD for compatible server boot storage
☑️ SATA III 6Gb/s interface for supported systems
☑️ Compact disk-on-module design installs directly into a motherboard SATA port
☑️ Useful for operating system boot, recovery, license, embedded storage, and lightweight system drive use
☑️ Helps free front drive bays for data drives or RAID storage
☑️ Compatible with select PowerEdge 13th generation server platforms
☑️ Compatible with Supermicro SATADOM / SuperDOM-ready motherboard configurations
☑️ Interchangeable with 6GMMX, 0T4M4, CMKK7, SSD-DM064-SMCMVN1, and DSSML-64GM413CADCB
☑️ Good replacement for failed, missing, degraded, or low-capacity SATADOM boot modules

⚙️ Fit Notes

• Match your original SATADOM part number whenever possible
• Confirm your system supports a 64GB SATA 6Gb/s SATADOM boot device
• Confirm the module has the same physical orientation and does not interfere with nearby motherboard components
• Confirm whether your system requires a separate SATADOM power cable
• Some Dell / Innodisk SATADOM modules require a compatible 4-pin / 2-wire power cable depending on the server configuration
• Supermicro X10 / newer yellow SATADOM ports normally provide power through the motherboard connector
• Supermicro X9 white SATA connectors require a compatible 5V SATADOM power cable
• This is not a standard 2.5" SATA SSD, mSATA SSD, M.2 SSD, NVMe SSD, or USB boot device
• BIOS boot mode, RAID / AHCI settings, and boot order may need to be configured after installation
• For mirrored boot configurations, use matching SATADOM modules when possible