Internal Triple Band MHF4 Adhesive FPC Wi-Fi Antenna for M.2 Wireless Cards - 1x Antenna

Internal adhesive-backed flexible PCB antenna designed for modern wireless modules that use an MHF4 / I-PEX 4 antenna interface. This compact low-profile antenna supports 2.4 GHz, 5 GHz, and 6 GHz wireless applications and is a strong fit for laptop upgrades, mini PCs, embedded systems, industrial devices, and custom wireless builds where space is limited. Sold individually. Most 2x2 Wi-Fi cards require a quantity of 2.
Specifications and supported frequency coverage verified from the current product page and distributor listing.

Technical Specifications

• Part Number: CPU-ANT-W63-FPC-SH100M4
• Antenna Type: Internal / embedded flexible PCB (FPC) flat patch antenna
• Port Configuration: Single port
• Termination: MHF4 / I-PEX 4
• Mounting Type: Adhesive-backed
• Directionality: Omnidirectional
• Supported Frequency Range: 2.4 GHz - 2.5 GHz, 5.15 GHz - 5.895 GHz, 5.95 GHz - 7.125 GHz
• Band Type: Triple band
• Center Frequencies: 2.45 GHz, 5.5225 GHz, 6.5375 GHz
• Peak Gain: 4.7 dBi, 7.8 dBi, 8.5 dBi
• VSWR: 1.5, 1.6, 1.8
• Max Power: 2 W
• Cable Length: 100 mm
• Antenna Body Size: 25 x 20 mm
• Height: 0.10 mm max
• Mounting Location: Internal / embedded
• Typical Applications: Wi-Fi, Bluetooth, ISM, U-NII, Zigbee

Technical specifications verified from the current manufacturer product page and distributor technical attributes.

Important Note

This antenna is sold individually.

Please note that most wireless cards require 2 antennas for proper operation and full performance. If you are replacing or installing a compatible 2x2 Wi-Fi / Bluetooth card, a quantity of 2 is normally needed.

Interchangeable / Replacement Part Numbers

CPU-ANT-W63-FPC-SH100M4, ANT-W63-FPC-SH100M4, L9000222-01

✅ Confirmed Compatibility

Please note that the following list is not exhaustive. Compatibility depends on your system's specific configuration. It's essential to verify compatibility with your system or enclosure manufacturer prior to installation.

✔️ Intel Wi-Fi 7 Series: BE200NGW, BE201NGW, BE202NGW
✔️ Intel Wi-Fi 6E Series: AX210NGW, AX211NGW, AX411NGW
✔️ Intel Wi-Fi 6 Series: AX200NGW, AX201NGW, AX203NGW, AX101NGW
✔️ Intel Wireless-AC Series: 9560NGW, 9462NGW, 9461NGW, 9260NGW, 8265NGW, 8260NGW, 7265NGW, 3168NGW, 3165NGW
✔️ Killer Wireless Series: AX1650x, AX1675x, AX1690i, BE1750x

Compatibility was compiled from Intel/Killer M.2 2230 product families and Intel guidance that current M.2 / NGW wireless adapters use the same standard micro-coax antenna connector family.

☑️ Key Features

☑️ Compact 25 x 20 mm antenna body helps fit tight internal spaces more easily than longer strip-style antennas
☑️ MHF4 / I-PEX 4 termination supports many popular M.2 2230 wireless cards
☑️ Triple-band coverage supports modern 2.4 GHz, 5 GHz, and 6 GHz wireless applications
☑️ Adhesive-backed FPC construction allows clean internal mounting in laptops, mini PCs, and embedded devices
☑️ Omnidirectional design helps provide flexible installation options inside compact systems
☑️ Ideal for replacement, upgrade, repair, and custom wireless integration projects

⚙️ Fit Notes

• This is a single antenna. Most 2x2 wireless cards require 2 antennas for full performance.
• Designed for wireless cards that use MHF4 / I-PEX 4 antenna connectors.
• Not intended for older U.FL / MHF1 antenna leads or legacy half-mini / mini PCIe antenna setups unless a proper conversion path is used.
• Before ordering, confirm your wireless card uses the MHF4 connector style and that your device has enough clearance for a 25 x 20 mm antenna body and 100 mm lead.
• For best signal performance in dual-antenna installations, mount the antennas with spacing between them when possible and avoid placing them directly against large metal obstructions.