10.2GB 5.4K RPM IDE PATA 3.5-Inch Hard Disk Drive (HDD)

This legacy 10.2GB-class internal hard drive is designed for older desktops, workstations, industrial computers, POS terminals, kiosks, and embedded equipment requiring a standard 3.5-inch PATA/IDE drive. Exact model, label, cache size, and supported ATA transfer mode may vary among the verified interchangeable drives.

Technical Specifications

• Capacity: 10.2GB class
• Form Factor: 3.5-inch desktop
• Drive Height: Approximately 1 inch
• Spindle Speed: 5,400 RPM
• Interface: IDE / EIDE / Parallel ATA
• Data Connector: 40-pin PATA/IDE
• Power Connector: Standard 4-pin peripheral power
• Logical Sector Size: 512 bytes
• Jumper Modes: Master, Slave, and Cable Select depending on model
• Installation Type: Internal
• Drive Selection: Exact model and firmware revision may vary based on available inventory

Interchangeable / Replacement Part Numbers

Model Numbers:

2B010H1, 2R010H1, 31024H1, 31024H2, 31024U2, 91020D6, 91020U3, 91021U2, 91024U2, AC310200R, AC310200-00RT, CT210, CX10A011, CX10A013, EL10A011, EL10A012, EL10A013, EX10A011, EX10A012, EX10A013, LB10A011, LB10A013, LB10A014, LB102AT, MPC3102AT, MPE3102AT, MPF3102AT, MPG3102AT, QM310200CX-A, QM310200EL-A, QM310200EX-A, QML10200LB-A, ST310212A, ST310213A, ST310230A, ST310231A, ST310232A, ST310240A, SV1021D, SV1021H, SV1022D, SV1023D, WD102AA, WD102EB

OEM, label, suffix, and search cross-references:

022TEC, 116193-001, 116193-002, 173339-001, 174014-001, 174015-001, 123389-001, 204523-001, 405-0028, 5501428, 605-0028, 655T-0044, 705-0028, 9N5005-030, 9N5005-031, 9N5005-101, 9N5005-301, 9R5002-003, 9R5002-030, 9R5002-303, D9623A, D9805-60101, D9805-60103, D9805-63001, D9805-69001, P2665-63001, P2665-63003, 01750034137, 2B010H1-110511, 2B010H1-111111, CA05367, CA05367-B331, CA05367-B332000T, CA05367-B53100EP, CA05367-B803000N, CA05367-B85300P3, CA05367-B88300M2, CA05367-B9800EL3, CA05367-B98300EL, CA05423-B321, CA05423-B86200FB, CA05423-B94200EB, CX10A01101B, CX10A01102B, LB10A01101A, LB10A01301A, SV1021D/TGE, WD-102AA, WD-102EB, WD102AA-00AAA2, WD102AA-00AAA4, WD102AA-00ANA0, WD102AA-00ANA0-1, WD102AA-00BAA0, WD102AA-40AAA5, WD102AA-40ANA2, WD102AA-53AAA4, WD102AA-53ANA0

⭐ External Enclosure Add-On — Sold Separately

Want to use this 3.5-inch IDE/PATA hard drive as an external USB drive for cloning, imaging, backup, file transfer, diagnostics, or legacy-data recovery? Pair it with our 3.5-Inch Desktop USB 2.0 IDE PATA EIDE Hard Drive External Enclosure.

• Supports standard 3.5-inch, 40-pin IDE / PATA / EIDE desktop hard drives
• USB 2.0 host connection; backward compatible with USB 1.1
• Tool-free enclosure design
• Includes USB cable, AC power adapter, and mounting kit
• Supplies the +5V and +12V power required by desktop hard drives
• Ideal for cloning, imaging, backup, bench testing, file recovery, and data transfers
• Hard drive sold separately
• Not compatible with 2.5-inch 44-pin notebook IDE drives or SATA drives

✅ Confirmed Compatibility

This list is not exhaustive. Compatibility requires a standard 3.5-inch PATA/IDE bay, 40-pin ATA controller, 4-pin peripheral power connector, and BIOS support for drives larger than 8.4GB. Verify the original drive, mounting hardware, cable, system BIOS, and required disk image before ordering.

Directly documented configurations:

✔️ PowerMate CT: 10.2GB, 5,400 RPM Ultra ATA/66 configurations
✔️ Deskpro EX Series: 10GB 5,400 RPM Ultra ATA configurations
✔️ Deskpro EN Series: Desktop and small-form-factor IDE configurations
✔️ Deskpro EP: P500/810E configurations using a 3.5-inch Ultra ATA drive
✔️ iPAQ 2.0 Desktop: Legacy Free and Legacy Lite configurations
✔️ Vectra VL400 Mini-Tower: Including configurations using drive option D9623A
✔️ Brio BA410: 10GB IDE-equipped configurations
✔️ OptiPlex GX110: DCP, DCS, DCM, and MMP chassis with the original 3.5-inch EIDE bay
✔️ IntelliStation M Pro: Type 6889 with BIOS 26a or later
✔️ Power Mac G4: Early tower configurations originally equipped with a 10GB Ultra ATA hard drive
✔️ VAIO: PCV-R532DS, PCV-L400
✔️ Embedded/Sinem PC: Low End 01750034503 and High End 01750031810
✔️ Self-Service Systems using the Embedded/Sinem PC: ProCash 2000, 2050, 2150, 2156, 3100; Pro Info; Pro Consult; Orbiter
✔️ SIMATIC PC FI25 V2: 10GB EIDE configurations, including 6ES7645-1DL00-0AE1, 6ES7645-1DL03-0AE1, 6ES7645-1DL00-0HE1, 6ES7645-1DM00-0DE1, and 6ES7645-1EP00-0DE1
Additional interface-confirmed applications requiring configuration verification:
✔️ Professional Workstation AP500: IDE-equipped configurations
✔️ SurePOS 300: 4810-310, 4810-320, 4810-31H, 4810-32H, 4810-W2H, 4910-32H, 4910-32E, 4910-32A
✔️ SurePOS 500: 4840-533, 4840-543, 4840-553, 4840-563
✔️ Ultra 5 and Ultra 10: EIDE-equipped configurations; proper mounting, disk labeling, partitioning, and operating-system restoration are required
✔️ Legacy Desktop Systems: Systems with a standard 3.5-inch drive bay, native 40-pin PATA controller, 4-pin peripheral power, and BIOS/LBA support above 8.4GB
✔️ Industrial and Embedded Computers: Systems using a standard unlocked PATA drive without exact firmware, geometry, or security-lock requirements

☑️ Key Features

☑️ Legacy 10.2GB-class storage capacity
☑️ Standard 3.5-inch desktop form factor
☑️ Native 40-pin PATA/IDE interface
☑️ Standard 4-pin peripheral power connection
☑️ 5,400 RPM operation
☑️ Supports Master, Slave, or Cable Select installation
☑️ ATA-33, ATA-66, and ATA-100 drives negotiate with compatible older controllers
☑️ Suitable for legacy desktops, POS terminals, kiosks, industrial PCs, and embedded equipment
☑️ Multiple verified drive models and OEM label cross-references

⚙️ Fit Notes

• This is a 3.5-inch desktop PATA/IDE drive. It is not interchangeable with a 2.5-inch 44-pin notebook drive.
• It is not compatible with SATA, SCSI, SAS, proprietary hot-swap, or backplane-only connections.
• The drive requires both a 40-pin IDE ribbon cable and a separate 4-pin peripheral power connector.
• Use the jumper diagram printed on the actual drive to select Master, Slave, or Cable Select. Jumper locations vary between models.
• When using Cable Select, both devices on the ATA channel must be configured for Cable Select. The black end connector is normally master and the gray middle connector is normally slave.
• An 80-conductor ATA cable is recommended for ATA-66 or ATA-100 operation even though the connector still contains 40 pins.
• The drive can negotiate a slower transfer mode when connected to an older ATA controller.
• A 10.2GB drive exceeds the classic 8.4GB BIOS barrier. Update the system BIOS or use a compatible PCI ATA controller if the drive is not detected correctly.
• The 32GB BIOS barrier does not normally affect this drive because its capacity is below 32GB.
• Set BIOS drive detection to Auto or LBA when those options are available.
• Partitioning, formatting, and operating-system installation or image restoration are required before use.
• Systems using FAT16 may require multiple partitions. A compatible FAT32 or other supported filesystem is generally required for a single partition larger than 2GB.
• Marketed capacities vary slightly between 10GB, 10.1GB, 10.2GB, and 10.24GB conventions. For sector-by-sector cloning, verify that the replacement drive’s total LBA count is equal to or greater than the source drive.
• Industrial, POS, kiosk, laboratory, and self-service equipment may require an exact boot image, partition layout, CHS geometry, firmware revision, ATA security state, or software license.
• If the equipment requires an exact drive model or firmware, order that exact part number instead of a general functional substitute.
• Do not hot-plug a PATA drive. Disconnect AC power before installation.
• A drive caddy, mounting rails, screws, ribbon cable, recovery image, and operating system are not included unless specifically stated.