525W Power Supply for Precision T3500

This genuine OEM 525W power supply is designed for Precision T3500 workstations equipped with the removable R951H power-distribution harness. Each unit is cleaned, inspected and fully tested before shipment.

✔️ Genuine OEM Power Supply!
✔️ Grade A, Cleaned and Fully Tested!
✔️ Includes CPU Medics Limited Warranty!

Technical Specifications

Maximum Output Power: 525W
Category: Workstation Power Supply
AC Input: 100–240V~, 7.9A, 50/60Hz
AC Inlet: IEC C14
Required AC Cable: IEC C13 power cable
Dimensions: 153mm x 98mm x 164mm
Output Connection: Proprietary multi-pin receptacle for the R951H wiring harness
Required Harness: R951H power-supply wiring harness
Harness Included: No

DC Output

+5V: 20A, +3.3V: 20A, +12VA: 18A, +12VB: 18A, +12VC: 18A, -12V: 0.5A, +5VSB: 4A

Harness Connector Details - Sold Separately

The power supply requires the removable R951H wiring harness. When installed, the R951H harness provides the following system-side connections:

• 24-Pin ATX Power Connector: 1
• 8-Pin ATX Power Connector: 1
• 4-Pin Floppy Power Connector: 1
• IDE/Molex Power Connector: 1
• 6-Pin PCI-E Power Connector: 1
• SATA Power Connectors: 5

The R951H harness is not built into the power supply and is not included.

Interchangeable / Replacement Part Numbers

0G05V, 6W6M1, D525A001L, D525AF-00, D525E001L, DPS-525FBA, DPS-525FB A, H525AF-00, H525EF-00, M821J, M822J, N525EF-00, U597G

★ Cross Reference / Cross-Sell

Required Wiring Harness — Sold Separately:

R951H Power Supply Wiring Harness for Precision T3500

The R951H harness connects the power supply to the motherboard, processor-power input, storage devices and supported PCI-E hardware.

Required AC Power Cable — Sold Separately:

121565-001 - 6 FT C13 Power Cable

The IEC C13 cable connects the power supply’s IEC C14 inlet to a standard AC wall outlet.

✅ Confirmed Compatibility

Compatibility depends on the system’s original power configuration. Verify the existing power-supply part number, dimensions and harness connection before ordering.

✔️ Precision T3500: T3500 Mini Tower Workstation configurations using the 525W power supply and R951H wiring harness

☑️ Key Features

☑️ 525W maximum power output
☑️ Three dedicated +12V output rails
☑️ Universal 100–240V AC input
☑️ Direct-fit dimensions for the Precision T3500 chassis
☑️ Removable power-distribution harness design
☑️ Supports motherboard, CPU, PCI-E, SATA, Molex and floppy power through the R951H harness
☑️ Standard IEC C14 AC inlet
☑️ Cleaned, inspected and fully tested

⚙️ Fit Notes

• The R951H power-supply wiring harness is required and is not included.
• Transfer the original R951H harness from the existing power supply or purchase the replacement separately.
• This is not a standard ATX power supply and does not have permanently attached ATX, SATA or PCI-E power leads.
• Confirm the existing part number, physical dimensions, mounting points and proprietary harness receptacle before installation.
• Do not assume compatibility with T5500, T7500 or another workstation based only on the 525W rating.
• The IEC C13 AC power cable is sold separately unless explicitly shown or stated as included.
• Disconnect the system from AC power and allow the power supply to discharge before servicing.