535442-001 - CPU Cooling Heatsink and Fan Assembly for Pavilion dv7-3000 Series

The 535442-001 is a complete OEM CPU cooling assembly for select Pavilion dv7-3000 series notebooks. It combines a copper heatpipe, processor contact plate, cooling fins, and blower fan to transfer heat away from critical components and exhaust it through the chassis vents.

What’s Included

Complete 535442-001 cooling assembly with heatsink, copper heatpipe, mounting frame, cooling fins, and integrated blower fan

Thermal paste is not included.

Technical Specifications

Spare Part Number: 535442-001
Part Type: CPU cooling heatsink and fan assembly
Cooling Design: Copper heatpipe with metal contact plate and aluminum cooling fins
Fan Type: Integrated blower-style cooling fan
Fan Connector: 3-pin board connector
Fan Voltage: 5V DC
Airflow Design: Side-exhaust chassis cooling
Installation Type: Internal direct replacement
Compatible Configuration: Select Pavilion dv7-3000 series configurations
Thermal Compound: Required during installation and sold separately

Interchangeable / Replacement Part Numbers

535442-001

Recommended Thermal Paste

Fresh thermal compound should be applied whenever the heatsink is removed or replaced. For proper heat transfer, pair this assembly with Shin-Etsu G751 High-Performance Thermal Grease, sold separately.

✅ Confirmed Compatibility

Please note that this list is not exhaustive. The Pavilion dv7-3000 platform was manufactured with multiple processor, graphics, motherboard, and cooling configurations. Confirm part number 535442-001 and compare the complete heatsink layout before ordering.

✔️ Pavilion dv7-3000 Series: dv7-3010dx, dv7-3020nr, dv7-3040us, dv7-3050nr, dv7-3070nr

☑️ Key Features

☑️ Complete OEM cooling module with heatsink and blower fan
☑️ Copper heatpipe transfers heat to the exhaust fin assemblies
☑️ Integrated blower directs airflow through the chassis vents
☑️ 3-pin fan connector matches the original board connection
☑️ Preassembled cooling layout maintains proper component alignment
☑️ Helps correct overheating, excessive fan noise, and thermal shutdowns
☑️ Uses the original chassis mounting locations without an adapter

⚙️ Fit Notes

• Confirm that the original cooling assembly is marked 535442-001 before ordering.
• Do not order by the dv7-3000 family name alone. This notebook family was produced with different CPU, graphics, motherboard, and heatsink configurations.
• Compare the heatpipe shape, contact-plate positions, mounting points, exhaust-fin locations, fan housing, and 3-pin connector with the original assembly.
• Disconnect the AC adapter and remove the battery before servicing the cooling system.
• Completely remove the old thermal compound from the processor and heatsink contact surfaces before installation.
• Apply a thin, even layer of fresh thermal paste before securing the heatsink.
• Retain or replace any thermal pads in their original locations and with the correct thickness. Do not substitute thermal paste where a thermal pad is required.
• Clean accumulated dust from the fan intake, cooling fins, and chassis exhaust vents before reassembly.
• Tighten the heatsink screws gradually and in the numbered sequence when markings are present.
• This listing is for the complete 535442-001 heatsink and fan assembly. Thermal paste, thermal pads, and additional mounting hardware are not included unless shown.