HP A1703-69577 - Processor board for all configurations - Processor Board (for all Configurations) - Plugs into the Backplane Board - for HP Repair Use ONLY Retail
HP 5063-2770 - Active distribution panel (ADP I) - External MUX panel - Has eight 25-pin RS-232C ports Retail
HP 5062-3074 - Cable assembly - 78-pin (M) connector with thumbscrews to DB-9 (F) connector - 3.9m (12.9ft) long Retail
HP 5062-3054 - Active distribution panel (ADP II) - External MUX panel - Has eight 25-pin RS-232C ports Retail
HP A1707-90016 - HP model 3000 series 9x7, and HP model 9000 series 8x7 and 800/X CE handbook - For HP repair use ONLY Retail
HP 5062-3308 - HP-FL CIO disk interface - CIO HP-FL Disk Interface (27111A or 27115A) - Requires PBA Retail
HP 5062-3303 - CIO HP-IB interface board - CIO HP-IB Interface Board (27113A) - Requires PBA Adapter Retail
HP 28655-69004 - Single-Ended SCSI-2/Centronics host adapter board - Single Ended SCSI-2/Centronics Host Adapter Board - for the HP-PB I/O Board Slot (P/O 28642A or 28655A) Retail
HP 28615-69004 - Fiberoptic peripheral interface board - Fiberoptic Peripheral Interface Board - for the HP-PB I/O Board Slot (P/O 28615A or 28616A) Retail
HP A1700-60005 - Precision bus adapter (l-shaped) - Adapts CIO board to backplane - Precision Bus Adapter(L-Shaped) - Adapts CIO Bd to Backplane Retail
HP 97560-69021 - Single-ended SCSI controller board - Firmware not included - Mounts on top of 677MB or 1.3GB Drive Retail
HP 97560-69162 - 1.3GB SCSI hard drive mechanism - 5.25in, full height - Controller PC board is NOT included Retail
HP C1534-60008 - Bracket (rail) kit - Includes left and right side brackets - Used to mount a DDS drive in a 5.25 inch drive slot Retail
HP A1703-63007 - SCSI ribbon cable - 50-pin (F) connector to SCSI controller and four 50-pin (F) connectors for drives - 79cm (31in) long - From backplane to internal drives and SCSI connector Retail
HP 1420-0507 - 6V battery pack - 3.7Ah, lead acid battery pack with cable - Mounts in front part of power supply Retail
