The Intel Xeon E5-1630 v4 is a quad-core workstation processor with a 3.70GHz base frequency, up to 4.00GHz Turbo Boost, 8 threads and 10MB cache. Built for compatible LGA2011-3 systems, it supports DDR4 memory, ECC capabilities and PCI Express 3.0.
This processor is identified by specification code SR2PF, Intel ordering code CM8066002395300, and OEM spare references including 855497-001, 864634-001 and 00FC936.
The E5-1630 v4 is designed for a single-processor configuration. Compatible systems with two physical processor sockets must use this model as their only processor.
Actual memory capacity, speed, ECC support and available PCIe connections depend on the motherboard and system configuration. The processor’s 1.5TB memory specification does not mean every compatible workstation supports that capacity.
E5-1630V4, E5-1630 v4, SR2PF, CM8066002395300, 855497-001, 864634-001, 00FC936, T9U62AV, E51630V4, CM8066002395300, 855497001, 864634001, 00FC936, T9U62AV
OEM spare and configuration numbers may appear on packaging, service records or system documentation rather than on the processor itself. The processor model and SR2PF marking provide the primary identification on the CPU.
Building or repairing a compatible Z440 workstation? A replacement system board is available separately:
761514-001 Z440 Workstation Motherboard
The motherboard must have a BIOS version that supports the E5-1630 v4 processor.
Compatibility depends on the system’s BIOS, motherboard, cooling and power configuration. Update the BIOS as needed before installing the processor.
✔️ Z Series Workstations: Z440 and Z640 configurations supporting the E5-1630 v4. The Z640 must use this processor in a single-processor configuration.
✔️ ThinkStation P410: Supported P410 workstation configurations, including machine type 30B3.
✔️ ThinkStation P510: Supported P510 workstation configurations, including machine types 30B4 and 30B5.
✔️ ThinkStation P710: Supported single-processor configurations. A second processor cannot be used with the E5-1630 v4.
✔️ Precision Tower 5810 / T5810: Supported configurations with BIOS A13 or later.
✔️ Precision Tower 7810 / T7810: Supported single-processor configurations with BIOS A13 or later.
The following motherboard models list the E5-1630 v4 in their processor support information. The BIOS versions shown are the minimum versions listed for this processor:
✔️ ASUS X99-A: BIOS 3004 or later.
✔️ ASUS X99-S: BIOS 3004 or later.
✔️ ASUS SABERTOOTH X99: BIOS 3004 or later.
✔️ ASUS X99-DELUXE/U3.1: BIOS 3004 or later.
✔️ ASUS X99-E: BIOS 1701 or later.
Motherboard models with similar names can have different BIOS requirements. Confirm the complete motherboard model, installed BIOS and memory support before ordering.
The E5-1630 v4 supports one processor only. It cannot be paired with a second E5-1630 v4 or another processor, even when installed in a workstation with two sockets.
This processor uses LGA2011-3, also known as Socket R3. Earlier LGA2011 systems such as Z420 and Z620 workstations use a different platform and are not direct matches for this CPU.
The earlier E5-1630 v3 and this E5-1630 v4 are different processor generations. They may use the same socket type, but the motherboard BIOS must specifically support the v4 processor.
☑️ Quad-core processor with 8 threads
☑️ 3.70GHz base frequency
☑️ Up to 4.00GHz maximum Turbo Boost frequency
☑️ 10MB cache
☑️ SR2PF production specification code
☑️ R0 processor stepping
☑️ LGA2011-3 / Socket R3 installation
☑️ Four DDR4 memory channels
☑️ Supports DDR4 memory speeds up to 2400 MT/s
☑️ ECC capability with compatible memory and platforms
☑️ PCI Express 3.0 support with up to 40 processor lanes
☑️ Hyper-Threading technology
☑️ Virtualization technology support
☑️ AVX2 instruction support
☑️ Compatible with the workstation and motherboard configurations listed above
☑️ Cross-referenced to Intel and OEM processor part numbers
Fresh thermal compound helps transfer heat from the processor to the heatsink during installation.